Journal Publications (SCI & SCI-E) [h-index = 38]  

2019

W. Jiang, H. Zhou, Y. Cao*, J. Nie, Y. Li, Y. Zhao, M. Kawasaki, T.G. Langdon, Y. Zhu
"On the heterogeneity of local shear strain induced by high-pressure torsion"
Advanced Engineering Materials (2019) 1900477.

M. Kawasaki*, S.-H. Jung, J.-M. Park, J. Lee, J.-i. Jang, J.-K. Han
"Mechanical bonding of Aluminum hybrid alloy system through high-pressure torsion"
Advanced Engineering Materials (2019) 1900483.

A. Rijal, S.P. Singh, J.-K. Han, M. Kawasaki, P. Kumar*
"Effect of high-pressure torsion on hardness and electrical resistivity of commercially pure Cu"
Advanced Engineering Materials (2019) 1900547.

J. Gubicza*, P.T. Hung, M. Kawasaki, J.-K. Han, Y. Zhao, Y. Xue, S. Huang, J.L. Lábár
"Influence of severe plastic deformation on the microstructure and hardness of a CoCrFeNi high-entropy alloy:A comparison with CoCrFeNiMn"
Materials Characterization 154 (2019) 304-314.

J.-K. Han, J.-i. Jang, T.G. Langdon, M. Kawasaki*
"Bulk-State Reactions and Improving the Mechanical Properties of Metals through High-Pressure Torsion"
Materials Transactions 60 (2019) 1131-1138.      

M. Kawasaki, T.G. Langdon*
"The Contribution of Severe Plastic Deformation to Research on Superplasticity"
Materials Transactions 60 (2019) 1123-1130.

J. Gubicza*, A. Heczel, M. Kawasaki, J.-K. Han, Y. Zhao, Y. Xue, S. Huang, J.L. Lábár
"Evolution of microstructure and hardness in Hf25Nb25Ti25Zr25 high-entropy alloy during high-pressure torsion"
Journal of Alloys and Compounds 788 (2019) 318-328.

X. Li, R. Dippenaar, J.-K. Han, M. Kawasaki, K.-D. Liss*
"Phase transformation and structure evolution of a Ti-45Al-7.5Nb alloy processed by high-pressure torsion"
Journal of Alloys and Compounds 787 (2019) 1149-1157.

D.-H. Lee, J.-M. Park, G. Yang, J. He, Z. Lu, J.-Y. Suh, M. Kawasaki*, U. Ramamurty*, J.-i. Jang*
"Nano-graining a particle-strengthened high-entropy alloy"
Scripta Materialia 163 (2019) 24-28.

D. Hernández-Escobar*, Z.U. Raman, H. Yilmazer, M. Kawasaki, C.J. Boehlert
"Microstructural evolution and intermetallic formation in Zn-Mg hybrids processed by High-Pressure Torsion"
Philosophical Magazine 99 (2019) 557-584.


2018

J.-K. Han, D.K. Han, G.Y. Liang, J.-i. Jang*, T.G. Langdon, M. Kawasaki*
"Direct bonding of aluminum-copper metals through high-pressure torsion processing"
Advanced Engineering Materials 20 (2018) 1800642.

M. Kawasaki, T.G. Langdon*
"Fabrication of High Strength Hybrid Materials through the Application of High-Pressure Torsion"
Acta Physica Polonica A 134 (2018) 615-622.

M. Kawasaki*, J.-K. Han, D.-H. Lee, J.-i. Jang, T.G. Langdon
"Fabrication of nanocomposites through diffusion bonding under high-pressure torsion"
Journal of Materials Research 33 (2018) 2700-2710.

M. Kawasaki*
Book review: Defect Structure and Properties of Nanomaterials Second and Extended Edition, Jenȍ Gubicza (Ed.). Woodhead Publishing, Cambridge, UK, 2017, 410 pp. ISBN: 0081019173.
Microscopy and Microanalysis 24(3) (2018) 323.

D.-H. Lee, I.-C. Choi, G. Yang, Z. Lu, M. Kawasaki, U. Ramamurty, R. Schwaiger*, J.-i. Jang*
"Activation energy for plastic flow in nanocrystalline CoCrFeMnNi high-entropy alloy: A high temperature nanoindentation study"
Scripta Materialia 156 (2018) 129-133.

M. Kawasaki*, T.G. Langdon
"Superplasticity in ultrafine-grained materials"
Review on Advanced Materials Science 54 (2018) 46-55.

M. Demirtas, M. Kawasaki, H. Yanar, G. Purcek
High temperature superplasticity and deformation behavior of naturally aged Zn-Al alloys with different phase compositions
Materials Science and Engineering A 730 (2018) 73-83.

A. Heczel*, M. Kawasaki, D. Ugi, J.-i. Jang, T.G. Langdon, J. Gubicza
"The influence of chemical heterogeneities on the local mechanical behavior of a high-entropy alloy: A micropillar compression study"
Materials Science and Engineering A 721 (2018) 165-167.

S.-H. Jung, J. Lee, M. Kawasaki*
"Effects of pre-strain on the aging behavior of Al 7075 alloy for hot-stamping capability"
Metals 8 (2018) 137(1-11).

J.-K. Han, X. Li⁠⁠, R. Dippenaar, K.-D. Liss, M. Kawasaki*
"Microscopic plastic response in a bulk nano-structured TiAl intermetallic compound processed by high-pressure torsion"
Materials Science and Engineering A 714 (2018) 84-92.


2017

M. Kawasaki*, T.G. Langdon
"Using severe plastic deformation to fabricate strong metal matrix composites"
Materials Research 20 (Suppl.1) (2017) 46-52.

P.H.R. Pereira, Y. Huang, M. Kawasaki, T.G. Langdon
"An examination of the superplastic characteristics of Al–Mg–Sc alloys after processing"
Journal of Materials Research 32 (2017) 4541-4553.

D.-H. Lee, J.-A. Lee, Y. Zhao, Z. Lu, J.-Y. Suh, J.-Y. Kim, U. Ramamurty, M. Kawasaki*, T.G. Langdon, J.-I. Jang*
"Annealing effect on plastic flow in nanocrystalline CoCrFeMnNi high-entropy alloy: A nanomechanical analysis"
Acta Materiallia 140 (2017) 443-451.

R.B. Figueiredo, M. Kawasaki, T.G. Langdon*
"Developments in processing by severe plastic deformation at the 3rd Pan American Materials Congress"
JOM 69 (2017) 2022-2023.

J. Han, S.-H. Kang, S.-J. Lee, M. Kawasaki, H.-J. Lee, D. Ponge, D. Raabe, Y.-K. Lee*
"Superplasticity in a lean Fe-Mn-Al steel"
Nature Communications 8 (2017) 751(1-6).

H. Shahmir⁠, T. Mousavi⁠, J. He⁠, Z. Lu⁠, M. Kawasaki⁠, T.G. Langdon*
"Microstructure and properties of a CoCrFeNiMn high-entropy alloy processed by equal-channel angular pressing"
Materials Science and Engineering A 705 (2017) 411-419.

N. Haghdadi*, A. Zarei-Hanzaki, M. Kawasaki, A.B. Phillion, P.D. Hodgson
"Effect of severe plastic deformation and subsequent silicon spheroidizing treatment on the microstructure and mechanical properties of an Al-Si-Mg alloy",
Advanced Engineering Materials 19(7) (2017) 1700064(1-8).

M. Kawasaki*, J.-i. Jang
"Micro-mechanical response of an Al-Mg hybrid system synthesized by high-pressure torsion",
Materials 10(6) (2017) 596.

A. Heczel, M. Kawasaki, J.L. Lábár, J.-i. Jang, T. G. Langdon, J. Gubicza*
"Defect structure and hardness in nanocrystalline CoCrFeMnNi high-entropy alloy processed by high-pressure torsion",
Journal of Alloys and Compounds 711 (2017) 143-154.

M. Kawasaki, H.-J. Lee, J.-i. Jang, T.G. Langdon*
"Strengthening of metals through severe plastic deformation",
Reviews on Advanced Materials Science 48(2017) 13-24.

M. Kawasaki*, B. Ahn, P. Kumar, J.-i. Jang, T.G. Langdon
"Nano- and Micro- mechanical properties of ultrafine-grained materials processed by severe plastic deformation techniques",
Advanced Engineering Materials 19 (2017) 1600578(1-17).

H. Shahmir*, J. He, Z. Lu, M. Kawasaki, T.G. Langdon
"Evidence for superplasticity in a CoCrFeNiMn high-entropy alloy processed by high-pressure torsion",
Materials Science and Engineering A 685 (2017) 342-348.

J.-K. Han, H.-J. Lee, J.-i. Jang, M. Kawasaki*, T.G. Langdon
"Micro-mechanical and tribological properties of aluminum-magnesium nanocomposites processed by high-pressure torsion",
Materials Science and Engineering A 684 (2017) 318-327.


2016

H. Shahmir*, J. He, Z. Lu, M. Kawasaki, T.G. Langdon
"Effect of annealing on mechanical properties of a nanocrystalline CoCrFeNiMn high-entropy alloy processed by high-pressure torsion",
Materials Science and Engineering A 676 (2016) 294-303.

H.-J. Lee, J.-K. Han, S. Janakiraman, B. Ahn, M. Kawasaki*, T.G. Langdon
"Significance of grain refinement on microstructure and mechanical properties of an Al-3% Mg alloy processed by high-pressure torsion",
Journal of Alloys and Compounds 686 (2016) 998-1007.

B. Ahn, H.-J. Lee, I.-C. Choi, M. Kawasaki*, J.-i. Jang*, T.G. Langdon
"Micro-mechanical behavior of an exceptionally strong metal matrix nanocomposite processed by high-pressure torsion",
Advanced Engineering Materials 18 (2016) 1001-1008.

N.X. Zhang, N.Q. Chinh, M. Kawasaki, Y. Huang*, T.G. Langdon
"Self-annealing in a two-phase Pb-Sn alloy after processing by high-pressure torsion",
Materials Science and Engineering A 666 (2016) 350-359.

D.-H. Lee, M.-Y. Seok, Y. Zhao, I.-C. Choi, J. He, Z. Lu, J.-Y. Suh, U. Ramamurty, M. Kawasaki*, T.G. Langdon, J.-i Jang*
"Spherical nanoindentation creep behavior of nanocrystalline and coarse-grained CoCrFeMnNi high-entropy alloys",
Acta Materialia 109 (2016) 314-322.

M. Kawasaki*, B. Ahn, H.-J. Lee, A.P. Zhilyaev, T.G. Langdon
"Using high-pressure torsion to process an aluminum-magnesium nanocomposite through diffusion bonding",
Journal of Materials Research 31 (2016) 88-99.

M. Kawasaki*, R.B. Figueiredo, T.G. Langdon
"The requirements for superplasticity with an emphasis on magnesium alloys",
Advanced Engineering Materials 18 (2016) 127-131.

N. Haghdadi*, A. Zarei-Hanzaki, H.R. Abedi, D. Abou-Ras, M. Kawasaki, A.P. Zhilyaev
"Evolution of microstructure and mechanical properties in a hypoeutectic Al-Si-Mg alloy processed by accumulative back extrusion",
Materials Science and Engineering A 651 (2016) 269-279.

S.-H. Bae, K.H. Jung, Y.-C. Shin, D.J. Yoon, M. Kawasaki*
"Development of mechanical properties in a CaO added AZ31 magnesium alloy processed by equal-channel angular pressing",
Materials Characterization 112 (2016) 105-112.

P. Kumar, M. Kawasaki, T.G. Langdon*
"Review: Overcoming the paradox of strength and ductility in ultrafine-grained materials at low temperatures",
Journal of Materials Science 51 (2016) 7-18.

M. Kawasaki*, T.G. Langdon
"Review: achieving superplastic properties in ultrafine-grained materials at high temperatures",
Journal of Materials Science 51 (2016) 19-32.


2015

A.A.C. Asselli, D.R. Leiva, J. Huot, M. Kawasaki, T.G. Langdon, W.J. Botta*
"Effects of equal-channel angular pressing and accumulative roll-bonding on hydrogen storage properties of a commercial ZK60 magnesium alloy",
International Journal of Hydrogen Energy 40 (2015) 16971-16976.

M. Kawasaki, T.G. Langdon*
"Developing superplasticity in ultrafine-grained metals",
Acta Physica Polonica A 128 (2015) 470-478.

D.-H. Lee, I.-C. Choi, M.-Y. Seok, J. He, Z. Lu, J.-Y. Suh, M. Kawasaki*, T.G. Langdon, J.-i. Jang*
"Nanomechanical behavior and structural stability of a nanocrystalline CoCrFeNiMn high-entropy alloy processed by high-pressure torsion",
Journal of Materials Research 30 (2015) 2804-2815.

H. Azzeddine*, M. Harfouche, L. Hennet, D. Thiaudiere, M. Kawasaki, D. Bradai, T.G. Langdon
"An X-ray absorption spectroscopy investigation of the local atomic structure in Cu-Ni-Si alloy after severe plastic deformation and ageing",
Philosophical Magazine 95 (2015) 2482-2490.

T. Uesugi, M. Kawasaki*, M. Ninomiya, Y. Kamiya, Y. Takigawa, K. Higashi
"Significance of Si impurities on exceptional room-temperature superplasticity in a high-purity Zn-22%-Al alloy",
Materials Science and Engineering A 645 (2015) 47-56.

M. Kawasaki*, H.-J. Lee, T.G. Langdon
"Microstructural homogeneity and superplastic behavior in an aluminum-copper eutectic alloy processed by high-pressure torsion",
Journal of Materials Science 50(2015) 6700-6712.

J. Park, K.H. Jung, G.A. Lee, M. Kawasaki, B. Ahn*
"Evolution of precipitate morphology during extrusion in Mg ZK60A alloy",
Archives of Metallurgy and Materials 60(2015) 1423-1426.

M. Kawasaki, H.-J. Lee, M.Ch. Oh,B. Ahn*
"High temperature deformation flow of a ZK60A magnesium alloy after extrusion",
Archives of Metallurgy and Materials 60 (2015) 1327-1330.

X.H. An*, S.M. Zhu, Y. Cao, M. Kawasaki, X.Z. Liao*, S.P. Ringer, J.F. Nie, T.G. Langdon, Y.T. Zhu
"Atomic-scale investigation of interface-facilitated deformation twinning in severely deformed Ag-Cu nanolamellar composites",
Applied Physics Letters 107 (2015) 011901.

B. Ahn, A.P. Zhilyaev, H.-J. Lee, M. Kawasaki*, T.G. Langdon
"Rapid synthesis of an extra hard metal matrix nanocomposite at ambient temperature",
Materials Science and Engineering A 635 (2015) 109-117.

F.H. Larbi, H. Azzeddine, T. Baudin, M.H. Mathon, F. Brisset, A.L. Helbert, M. Kawasaki*, D. Bradai, T.G. Langdon
"Microstructure and texture evolution in a Cu–Ni–Si alloy processed by equal-channel angular pressing",
Journal of Alloys and Compounds 638 (2015) 88–94.

T. Mungole, P. Kumar*, M. Kawasaki, T.G. Langdon
The contribution of grain boundary sliding in tensile deformation of an ultrafine-grained aluminum alloy having high strength and high ductility",
Journal of Materials Science 50 (2015) 3549-3561.

H.-J. Lee, S.K. Lee, K.H. Jung, G.A. Lee, B. Ahn*, M. Kawasaki*, T.G. Langdon
Evolutionin hardness and texture of a ZK60A magnesium alloy processedby high-pressure torsion",
Materials Science and Engineering A 630 (2015) 90-98.

Y. Cao, Y.B. Wang, X.H. An, X.Z. Liao*, M. Kawasaki, S.P. Ringer, T.G. Langdon, Y.T. Zhu
Grain boundary formation by remnant dislocations from the de-twinning of thin nano-twins",
Scripta Materialia 100 (2015) 98-101.

R.B. Figueiredo*, F.L. Sicupira, L.R.C. Malheiros, M. Kawasaki, D.B. Santos, T.G. Langdon
Formation of epsilon martensite by high-pressure torsion in a TRIP steel",
Materials Science and Engineering A 625 (2015) 114-118.

I.-C. Choi, D.-H. Lee, B. Ahn, K. Durst, M. Kawasaki*, T.G. Langdon, J.-i. Jang*
Enhancement of strain-rate sensitivity and shear yield strength of a magnesium alloy processed by high-pressure torsion",
Scripta Materialia 94 (2015) 44-47.


2014

T. Mungole, P. Kumar*, M. Kawasaki, T.G. Langdon
A critical examination of the paradox of strength and ductility in ultrafine-grained metals",
Journal of Materials Research 29 (2014) 2534-2546.

I.-C. Choi, B.-G. Yoo, O. Kraft, R. Schwaiger, M.-Y. Seok, M. Kawasaki*, T.G. Langdon, J.-i. Jang*
High-cycle fatigue behavior of Zn-22% Al alloy processed by high-pressure torsion",
Materials Science and Engineering A 618 (2014) 37-40.

N.Q. Chinh, R.Z.Valiev, X.Sauvage, G.Varga, K.Havancsak, M. Kawasaki, B.B.Straumal, T.G. Langdon*
Grain boundary phenomena in an ultrafine-grained Al-Zn alloy with improved mechanical behavior for micro-devices”,
Advanced Engineering Materials 16 (2014) 1000-1009.

K. Yan, D. Bhattacharyya*, Q. Lian, S. Kabra, M. Kawasaki, D.G. Carr, M.D. Callagh, M. Avdeev, H. Li, Y. Wang, X. Liao, T.G. Langdon, K.D. Liss, R.J. Dippenaar
Martensitic phase transformation and deformation behavior of Fe-Mn-C-Al twinning-induced plasticity steel during high-pressure torsion”,
Advanced Engineering Materials 16 (2014) 927 - 932.

E. El-Danaf, M. Kawasaki*, M. El-Rayes, M. Baig, J.A. Mohammed, T.G. Langdon
Mechanical properties and microstructure evolution in an aluminum 6082 alloy processed by high-pressure torsion”,
Journal of Materials Science 49 (2014) 6597-6607.

M. Kawasaki*, R.B. Figueiredo, Y. Huang, T.G. Langdon
Interpretation of hardness evolution in metals processed by high-pressure torsion”,
Journal of Materials Science 49 (2014) 6586-6596.

Y. Huang*, M. Kawasaki, A. Al-Zubaydi, T.G. Langdon
Effect of anvil roughness on the flow patterns and hardness development in high-pressure torsion”,
Journal of Materials Science 49 (2014) 6517-6528.

M. Kawasaki*, T.G. Langdon
Review: achieving superplasticity in metals processed by high-pressure torsion”,
Journal of Materials Science 49 (2014) 6487-6496

T.-S. Cho, H.-J. Lee, B. Ahn*, M. Kawasaki*,T .G. Langdon
Microstructural evolution and mechanical properties in a Zn-Al eutectoid alloy processed by high-pressure torsion”,
Acta Materialia 72 (2014) 67-79.

Y. Huang*, M. Kawasaki, T.G. Langdon
An evaluation of the shearing patterns introduced by different anvil alignments in high-pressure torsion”,
Journal of Materials Science 49 (2014) 3146-3157.

H. Azzeddine, B. Mehdi, L. Hennet, D. Thiaudiere, B. Alili, M. Kawasaki*, D. Bradai, T.G. Langdon
An in situ synchrotron X-ray diffraction study of precipitation kinetics in a severely deformed Cu-Ni-Si alloy”,
Materials Science and Engineering A 597 (2014) 288-294.

I.-C. Choi, Y.-J. Kim, B. Ahn, M. Kawasaki*, T.G. Langdon, J.-i. Jang*
Evolution of plasticity, strain-rate sensitivity and the underlying deformation mechanism in Zn-22% Al during high-pressure torsion”,
Scripta Materialia 75 (2014) 102-105.

N. Haghdadi, A.Zarei-Hanzaki*, D. Abou-Ras, M.H. Maghsoudi, A. Ghorbani, M. Kawasaki
An investigation into the homogeneity of microstructure, strain pattern and hardness of pure aluminum processed by accumulative back extrusion”,
Materials Science and Engineering A 595 (2014) 179-187.

M. Kawasaki*
Different models of hardness evolution in ultrafine-grained materials processed by high-pressure torsion”,
Journal of Materials Science 49 (2014) 18-34.

Y. Cao, Y.B. Wang, X.H. An, X.Z. Liao*, M. Kawasaki, S.P. Ringer, T.G. Langdon, Y.T. Zhu
Concurrent microstructural evolution of ferrite and austenite in a duplex stainless steel processed by high-pressure torsion”,
Acta Materialia 63 (2014) 16-29.


2013

C.H. Lu, B.A. Remington, B.R. Maddox, B. Kad, H.S. Park, M. Kawasaki, T.G. Langdon, M.A. Meyers*
Laser compression of nanocrystalline tantalum”,
Acta Materialia 61 (2013) 7767-7780.

Y. Huang*, M. Kawasaki, T.G. Langdon,
Influence of anvil alignment on shearing patterns in high-pressure torsion”,
Advanced Engineering Materials 15 (2013) 747-755.

M. Kawasaki*, T.G. Langdon,
The many facets of deformation mechanism mapping and the application to nanostructured materials”,
Journal of Materials Research 28(2013)1827-1834.

M. Kawasaki, T.G. Langdon*,
"Evaluating the flow processes in ultrafine-grained materials at elevated temperatures"
Materials Research-Ibero-American Journal of Materials 16(3) (2013) 565-570.

A.Y. Khereddine, F.H. Larbi, H. Azzeddine, T. Baudin, F. Brisset, A.L. Helbert, M.H. Mathon, M. Kawasaki*, D. Bradai, T.G. Langdon
"Microstructures and textures of a Cu–Ni–Si alloy processed by high-pressure torsion",
Journal of Alloys and Compounds 574 (2013) 361-367.

A.M. Jorge Jr*, E. Prokofiev, G.F. de Lima, E. Rauch, M. Veron, W.J. Botta, M. Kawasaki, T.G. Langdon
An investigation of hydrogen storage in a magnesium-based alloy processed by equal-channel angular pressing”,
International Journal of Hydrogen Energy 38 (2013) 8306-8312.

Y. Cao, Y.B. Wang, Z.B. Chen, X.Z. Liao*, M. Kawasaki, S.P. Ringer, T.G. Langdon, Y.T. Zhu
"De-twinning via secondary twinning in face-centered cubic alloys",
Materials Science and Engineering A 578(2013)110-114.

A.Y. Khereddine, F.H. Larbi, M. Kawasaki*, T. Baudin, D. Bradai, T.G. Langdon
An examination of microstructural evolution in a Cu-Ni-Si alloy processed by HPT and ECAP”,
Materials Science and Engineering A 576(2013)149-155.

N.X. Zhang*, M. Kawasaki, Y. Huang, T.G. Langdon,
Microstructural evolution in two-phase alloys processed by high-pressure torsion”,
Journal of Materials Science 48 (2013)4582-4591.

T. Mungole, N. Nadammal, K. Dawra, P. Kumar*, M. Kawasaki, T.G. Langdon
Evolution of microhardness and microstructure in a cast Al–7 % Si alloy during high-pressure torsion”,
Journal of Materials Science 48 (2013) 4671-4680.

M. Kawasaki*, T.G. Langdon
The significance of grain boundary sliding in the superplastic Zn22 % Al alloyprocessed by ECAP”,
Journal of Materials Science 48 (2013) 4730-4741.

Z. Hegedus, J. Gubicza*, M. Kawasaki, N.Q. Chinh, J.L. Labar, T.G. Langdon
Stability of the ultrafine-grained microstructure in silver processed by ECAP and HPT”,
Journal of Materials Science 48 (2013) 4637-4645.

J. Wongsa-Ngam*, M. Kawasaki, T.G. Langdon
A comparison of microstructures and mechanical properties in a CuZr alloy processed using different SPD techniques”,
Journal of Materials Science 48 (2013) 4653-4660.

Y. Huang*, M. Kawasaki, T.G. Langdon
An investigation of flow patterns and hardness distributions using different anvil alignments in high-pressure torsion”,
Journal of Materials Science 48 (2013) 4533-4542.

M. Kawasaki*, J. Foisse, T.G. Langdon
Development of hardness homogeneity and superplastic behavior in an aluminumcopper eutectic alloy processed by high-pressure torsion ”,
Materials Science and Engineering A 561 (2013) 118-125.

Z. Hegedus, J. Gubicza*, M. Kawasaki, N.Q. Chinh, K. Süvegh, T.G. Langdon
High temperature thermal stability of ultrafine-grained silver processed by equal-channel angular pressing”,
Journal of Materials Science 48 (2013) 1675-1684.


2012

Y. Cao, Y.B. Wang, X.Z. Liao*, M. Kawasaki, S.P. Ringer, T.G. Langdon, Y.T. Zhu
Applied stress controls the production ofnano-twins in coarse-grained metals”,
Applied Physics Letters 101 (2012) 231903 1-5.

M.S. Matoso, R.B. Figueiredo*, M. Kawasaki, D.B. Santosa, T.G. Langdon
Processing a twinning-induced plasticity steel by high-pressure torsion”,
Scripta Materialia 67 (2012) 649-652.

J. Wongsa-Ngam, M. Kawasaki*, T.G. Langdon
The development of hardness homogeneity in a CuZr alloy processed by equal-channel angular pressing”,
Materials Science and Engineering A 556 (2012) 526-532.

V.L. Sordi*, M. Ferrante, M. Kawasaki, T.G. Langdon
Microstructure and tensile strength of grade 2 Titanium processed by equal-channel angular pressing and by rolling”,
Journal of Materials Science 47 (2012) 7870-7876.

A. Loucif, R.B. Figueiredo, M. Kawasaki, T. Baudin, F. Brisset, R. Chemam, T.G. Langdon*
"Effect of aging on microstructural development in an Al-Mg-Si alloy processed by high-pressure torsion",
Journal of Materials Science 47 (2012) 7815-7820.

S. Sabbaghianrad*, M. Kawasaki, T.G. Langdon
Microstructural evolution and the mechanical properties of an aluminum alloy processed by high-pressure torsion”,
Journal of Materials Science 47 (2012) 7789-7795.

J. Wongsa-Ngam*, M. Kawasaki, T.G. Langdon
Achieving homogeneity in a Cu-Zr Alloy processed by high-pressure torsion",
Journal of Materials Science 47 (2012) 7782-7788.

M. Kawasaki*, T.G. Langdon
Using deformation mechanism maps to depict flow processes in superplastic ultrafine-grained materials”,
Journal of Materials Science 47 (2012) 7726-7734.

M. Kawasaki, R.B. Figueiredo, T.G. Langdon*
Twenty-five years of severe plastic deformation: Recent developments in evaluating the degree of homogeneity through the thickness of disks processed by high-pressure torsion”,
Journal of Materials Science 47 (2012) 7719-7725.

Z. Hegedus, J. Gubicza*, M. Kawasaki, N.Q. Chinh, Z. Fogarassy, T.G. Langdon
Microstructure of low stacking fault energy silver processed by different routes of severe plastic deformation”,
Journal of Alloys and Compounds 536S (2012) S190-S193.

R.B. Figueiredo, M. Kawasaki, T.G. Langdon*
An evaluation of homogeneity and heterogeneity in metals processed by high-pressure torsion”,
Acta Physica Polonica A 122 (2012) 425-429.

N.Q. Chinh*, T. Csanadi, T. Gyori, R.Z. Valiev, B.B. Straumal, M. Kawasaki, T.G. Langdon
Strain rate sensitivity studies in an ultrafine-grained Al-30wt.% Zn alloy using micro- and nanoindentation”,
Materials Science and Engineering A 543 (2012) 117-120.

M. Kawasaki*, T.G. Langdon
An investigation of cavity development during superplastic flow in a zinc-aluminum alloy processed using severe plastic deformation”,
Materials Transactions 53 (2012) 87-95.

Y-Z. Tian*, J.J. Li, P. Zhang, S.D. Wu, Z.F. Zhang, M. Kawasaki, T.G. Langdon
Microstructures, strengthening mechanisms and fracture behavior of Cu-Ag alloys processed by high-pressure torsion”,
Acta Materialia 60 (2012) 269-281.

Y.B. Wang, D.D. Qu, X.H. Wang, Y. Cao, X.Z. Liao*, M. Kawasaki, S.P. Ringer, Z.W. Shan, T.G. Langdon, J. Shen
Introducing a strain hardening capability to improve the ductility of bulk metallic glasses via severe plastic deformation”,
Acta Materialia 60 (2012) 253-260.


2011

M. Kawasaki*, S.N. Alhajeri, C. Xu, T.G. Langdon
The development of hardness homogeneity in pure aluminum and aluminum alloy disks processed by high-pressure torsion”,
Materials Science and Engineering A 529 (2011) 345-351.

Z. Hegedus, J. Gubicza*, M. Kawasaki, N. Q. Chinh, Z. Fogarassy, T.G. Langdon
The effect of impurity level on ultrafine-grained microstructures and their stability in low stacking fault energy silver”,
Materials Science and Engineering A 528 (2011) 8694-8699.

M. Kawasaki*
Processing of ultrafine-grained materials through the application of severe plastic deformation”,
Metallurgical Materials Transaction A 42A (2011) 3035-3045.

J. Wongsa-Ngama, M. Kawasaki*, Y. Zhao, T.G. Langdon
Microstructural evolution and mechanical properties of a Cu-Zr alloy processed by high-pressure torsion”,
Materials Science and Engineering A 528 (2011) 7715-7722.

M. Kawasaki*, N. Balasubramanian, T.G. Langdon
Flow mechanisms in ultrafine-grained metals with an emphasis on superplasticity”,
Materials Science and Engineering A 528 (2011) 6624-6629.

M. Kawasaki*, T.G. Langdon
Developing superplasticity and a deformation mechanism map for the Zn-Al eutectoid alloy processed by high-pressure torsion”,
Materials Science and Engineering A 528 (2011) 6140-6145.

Y. Cao*, Y. Wang, R.B. Figueiredo, L. Chang, X. Liao, M. Kawasaki, W. Zheng, S. Ringer, T.G. Langdon, Y.T, Zhu
Three-dimensional shear strain patterns induced by high-pressure torsion and their impact on hardness evolution”,
Acta Materialia 59 (2011) 3903-3914.

M. Kawasaki*, A.de A. Mendes, V.L. Sordi, M. Ferrante, T.G. Langdon
Achieving superplastic properties in a Pb-Sn eutectic alloy processed by equal-channel angular pressing”,
Journal of Materials Science 46 (2011) 155-160.

M. Kawasaki*, R.B. Figueiredo, T.G. Langdon
An investigation of hardness homogeneity throughout disks processed by high-pressure torsion”,
Acta Materialia 59 (2011) 308-316.

M. Kawasaki*, V. Sklenicka, T.G. Langdon
Creep behavior of metals processed by equal-channel angular pressing”,
Kovové Materiály -Metallic Materials 49 (2011) 75-83.


2010

M. Kawasaki*, B. Ahn, T.G. Langdon
Significance of strain reversals in a two-phase alloy processed by high-pressure torsion”,
Materials Science and Engineering A 527 (2010) 7008-7016.

Z. Duan*, X. Liao, M. Kawasaki, R.B. Figueiredo, T.G. Langdon
Influence of high-pressure torsion on microstructural evolution in an Al-Zn-Mg-Cu alloy”,
Journal of Materials Science 45 (2010) 4621-4630.

M. Kawasaki*, B. Ahn, T.G. Langdon
Effect of strain reversals on the processing of high-purity aluminum by high-pressure torsion”,
Journal of Materials Science 45 (2010) 4583-4593.

Y. Cao, M. Kawasaki, Y.B. Wang, S.N. Alhajeri, X.Z. Liao*, W.L. Zheng, S.P. Ringer, Y.T. Zhu, T.G. Langdon
Unusual Macroscopic Shearing Patterns Observed in Metals Processed by High-Pressure Torsion”,
Journal of Materials Science 45 (2010) 4545-4553.

M. Kawasaki*, B. Ahn, T.G. Langdon
Microstructural Evolution in a Two-Phase Alloy processed by High-Pressure Torsion”,
Acta Materialia 58 (2010) 919-930.

M. Kawasaki*, V. Sklenicka, T.G. Langdon
An Evaluation of Creep Behavior in Ultrafine-Grained Aluminum Alloys Processed by ECAP”,
Journal of Materials Science 45 (2010) 271-274.


2009

M. Kawasaki*, S. Lee, T.G. Langdon
Constructing a Deformation Mechanism Map for a Superplastic Pb-Sn Alloy Processed by Equal-Channel Angular Pressing”,
Scripta Materialia 61 (2009) 963-966.

M. Kawasaki*, Z. Horita, T.G. Langdon
Microstructural Evolution in High Purity Aluminum Processed by ECAP”,
Materials Science and Engineering A 524 (2009) 143-150.

C. Xu, M. Kawasaki, T.G. Langdon*
The High-Temperature Creep Properties of Materials Processed using Severe Plastic Deformation”,
International Journal of Materials Research 100 (2009) 750-756.

M. Kawasaki*, T.G. Langdon
Flow Behaviour of a Superplastic Zn-22% Al Alloy Processed by ECAP”,
Materials Science and Engineering A 503 (2009) 48-51.

R.B. Figueiredo, M. Kawasaki, T.G. Langdon*
The Mechanical Properties of Ultrafine-Grained Metals at Elevated Temperatures”,
Reviews on Advanced Materials Science 19 (2009) 1-12.


2008

M. Kawasaki*, T.G. Langdon
The Significance of Strain Reversals during Processing by High-Pressure Torsion”,
Materials Science and Engineering A 498 (2008) 341-348.

M. Kawasaki*, T.G. Langdon
The Development of Internal Cavitation in a Superplastic Zinc-Aluminum Alloy Processed by ECAP”,
Journal of Materials Science 43 (2008) 7360-7365.

R.B. Figueiredo, M. Kawasaki, C. Xu, T.G. Langdon*
Achieving Superplastic Behavior in F.C.C. and H.C.P. Metals Processed by ECAP”,
Materials Science and Engineering A 493 (2008) 104-110.

M. Kawasaki*, I.J. Beyerlein, S.C. Vogel, T.G. Langdon
Characterization of Creep Properties and Creep Textures in Pure Aluminum Processed by Equal-Channel Angular Pressing”,
Acta Materialia 56 (2008) 2307-2317.

M. Kawasaki, T.G. Langdon*
Grain Boundary Sliding in a Superplastic Zinc-Aluminum Alloy Processed using Severe Plastic Deformation”,
Materials Transactions 49 (2008) 84-89. 


2007

 

M. Kawasaki, R.B. Figueiredo, C. Xu, T.G. Langdon*
Developing Superplastic Ductilities in Ultrafine-Grained Metals”,
Metallurgical Materials Transaction A 38A (2007) 1891-1898.

M. Kawasaki, T.G. Langdon*
Principles of Superplasticity in Ultrafine-Grained Materials”,
Journal of Materials Science 42 (2007) 1782-1796.


2006

M. Kawasaki, K. Kubota, K. Higashi, T.G. Langdon*
Flow and Cavitation in a Quasi-Superplastic Two-Phase Magnesium-Lithium Alloy”,
Materials Science and Engineering A 429 (2006) 334-340.

M. Kawasaki*, Y. Huang, C. Xu, M. Furukawa, Z. Horita, T.G. Langdon
A Quantitative Study of Cavity Development in the Tensile Testing of an Aluminum Metal Matrix Composite Processed by Equal-Channel Angular Pressing”,
Materials Science and Engineering A 410-411 (2006) 402-407.


2005

M. Kawasaki, C. Xu, T.G. Langdon*
An Investigation of Cavity Growth in a Superplastic Aluminum Alloy Processed by ECAP
Acta Materialia 53 (2005) 5353-5364.