— PUBLICATIONS —

Journal Publications

  1. Tajima, S., Sencer, B., Shamoto, E., 2017, "Accurate Interpolation of Machining Tool-paths Based on FIR Filtering", Precision Engineering, (Accepted, Under press)
  2. Dumanli, A., and Sencer., 2018, "Optimal High Bandwidth Control of Ball-screw  with Acceleration and Jerk Feedback", Precision Engineering (Under Review)
  3. Sencer, B., and Dumanli, A. 2017, “Optimal control of flexible drives with load side feedback”, International Academy for Production Engineering - Annals of the CIRP, Vol.66/1, Pages 357–360
  4. Tajima, S. and Sencer, B., 2017, “Uninterrupted Global Path Smoothing for CNC Machines”, International Journal of Machine Tools and Manufacture, Vol. 121, Pages 81-95
  5. Sencer, B., and Tajima, S., 2016, “Frequency Optimal Feed Motion Planning in Computer Numerical Controlled Machine Tools for Vibration Avoidance”, ASME Journal of Manufacturing Science and Engineering, 139(1), 011006.
  6. Tajima, S. and Sencer, B., 2016. “Kinematic Corner Smoothing for High Speed Machine Tools” International Journal of Machine Tools and Manufacture, vol. 108, pp. 27–43,
  7. Sencer, B., Ishizaki, K., Shamoto, E., 2015, “High Speed Cornering Strategy with Confined Contour Error and Vibration Suppression for CNC Machine Tools”, International Academy for Production Engineering - Annals of the CIRP, Vol. 64/1, pp. 369-372.
  8. Aoki, T., Sencer, B., Shamoto, E., Suzuki, N. and Koide, T, 2015,  “Development of a high-performance chip-guiding turning process—tool design and chip flow control,” International Journal of Advanced Manufacturing Technology, vol. 85, no. 1, pp. 791–805, 2015.
  9. Aoki, T., Sencer, B., Suzuki, N, Koide, T., Shamoto, E., 2015, “Mechanics of Chip-Guiding Cutting with Grooved Tools, Journal of the Japanese Society for Precision Engineering (JSPE), Vol. 82/1, pp. 75-81
  10. Shamoto, E., Hashimoto, Y., Shinagawa, M., Sencer, B., 2014, “Analytical estimation of contact stiffness and friction damping in bolted connection”, International Academy for Production Engineering - Annals of the CIRP, Vol. 61/1, pp. 353-356.
  11. Sencer, B., Inagaki, S., Shamoto, E., 2014, “A Curvature Optimal Sharp Corner Smoothing Algorithm for High-speed Feed Motion Generation of NC Systems along Linear Tool-paths”, International Journal of Advanced Manufacturing Technology, Vol. 76, Iss. 9-12 , pp. 1977-1992.
  12. Sencer, B., Shamoto, E., 2014, “Effective Torque Ripple Compensation in Feed Drive Systems Based on the Adaptive Sliding Mode Controller”, IEEE/ASME Transactions On Mechatronics, Vol. 19, No. 6., pp. 1764-1672.
  13. Ishizaki, K., Sencer, B., Shamoto, E., 2013, ”Cross Coupling Controller for Accurate Motion Synchronization of Dual Servo Systems”, International Journal of Automation Technologies, Vol.7, No.5, pp. 516-522.
  14. Sencer, B., Mori T., Shamoto E., 2013, “Design and Application of a Sliding Mode Controller for Accurate Motion Synchronization of Dual Servo Systems”, Control Engineering Practice, Vol. 21, pp. 1519-1530.
  15. Sencer, B., 2013, “Trajectory Generation Methods for CNC Machine Tools”, Journal of the Japanese Society for Precision Engineering (JSPE), Vol.79, Iss.7. pp. 631–637. (Review Paper)
  16. Shamoto, E., Mori, T., Sencer, B., Suzuki, N., Hino, R., 2013, “Suppression of Regenerative Chatter Vibration in Multiple Milling Utilizing Speed Difference Method - Analysis of Double-Sided Milling and Its Generalization to Multiple Milling Operations”, Precision Engineering, Vol. 37/3, pp. 580–589.
  17. Shamoto, E., Fujimaki S., Sencer, B., Suzuki, N., Kato, T., Hino, R., 2012, “A Novel tool path/posture optimization concept to avoid chatter vibration in machining”- Proposed concept and its verification in turning”, International Academy for Production Engineering - Annals of the CIRP, Vol. 61/1, pp. 331–334.
  18. Shamoto, E., Aoki, T., Sencer, B., Suzuki, N., Hino, R., Koide, T., 2011, ”Control of Chip Flow with Guide Grooves for Continuous Chip Disposal and Chip-pulling Turning”, International Academy for Production Engineering - Annals of the CIRP, Vol. 60/1, pp.125-128.
  19. Sencer, B., Altintas, Y., 2011, “Identification of 5-Axis Machine Tools Feed Drive Systems for Contouring Simulation”, International Journal of Automation Technologies, Vol.5, No.3, pp. 377-385.
  20. Altintas, Y., Sencer, B., 2010, “High Speed Contouring Control Strategy for Five Axis Machine Tools”, International Academy for Production Engineering - Annals of the CIRP, Vol. 59/1, pp. 417-420.
  21. Sencer, B., Altintas, Y., 2009, “Modeling and Control of Contouring Errors for Five-Axis Machine Tools. Part II – Precision Contour Controller Design”, Transactions of ASME Journal of Manufacturing Science and Engineering, Vol. 131, Issue 3, 031007.
  22. Sencer, B., Altintas, Y., Croft, E.A., 2009, “Modeling and Control of Contouring Errors for Five-Axis Machine Tools. Part I – Modeling”, Transactions of ASME Journal of Manufacturing Science and Engineering, Vol. 131, Issue 3, 031006.
  23.  Sencer, B., Altintas, Y., Croft, E.A., 2008, ‘‘Feed Optimization for Five-Axis CNC Machine Tools with Drive Constraints’’, International Journal of Machine Tools and Manufacture, Vol. 48, No 7-8, pp. 733-745.

Conference Articles

1. Sencer B., Maulimov, M., 2018, “A New Turning System Assisted By Chip-Pulling”, 46th SME North American Manufacturing Research Conference, NAMRC 46, Texas, USA (under review)

2. Maulimov, M. and Sencer, B., 2018, “Effect of Directional Relations on Milling Chatter Stability and Development of a Stability Index”, 46th SME North American Manufacturing Research Conference, NAMRC 46, Texas, USA (under  review)

Jacob B., Jordan, M., Ravi, B., and Burak, S., “DESIGN OF A FLEXURE-BASED PRECISION MOTION TABLE FOR AUTOMATED DEBURRING”, Proceedings of ASME International Manufacturing Science and Engineering Conference MSEC 2018, Dallas, Texas. (under  review)

Dumanli A, Sencer, B., 2017, “MULTI-AXIS TRAJECTORY GENERATION WITH OPTIMAL FREQUENCY SPECTRUM FOR VIBRATION AVOIDANCE. American Society of Precision Engineering (ASPE) 2017 General Assembly, Charlotte, North Carolina,, USA. (accepted)

Dumanli A, Sencer, B., 2016, “NON-COLLOCATED OPTIMAL CONTROL OF FLEXIBLE DRIVES WITH LOAD SIDE FEEDBACK”, American Society of Precision Engineering (ASPE) 2016 General Assembly, October 23-28, Portland, Oregon, USA.

Tajima, S., Sencer, B., 2016, “Uninterrupted Interpolation Of Short-Segmented Linear Tool-Paths Based On Jerk Limited Kinematic Corner Smoothing”, American Society of Precision Engineering (ASPE) 2016 General Assembly, October 23-28, Portland, Oregon, USA.

Tajima, S.,  Sencer, B., 2016, “Jerk Limited High Speed Cornering for CNC Machines with Controlled Contour Error”, The 16th International Conference on Precision Engineering(ICPE), 14-16 November 2016, Shizuoka, Japan.

Tajima, S.,  Sencer, B., 2016, “SMOOTH CORNERING STRATEGY FOR HIGH SPEED CNC MACHINE TOOLS WITH CONFINED CONTOUR ERROR”, Proceedings of the 11th ASME Manufacturing Science and Engineering Conference (MSEC), June 27 – July 1, 2016, Blacksburg, Virginia, USA.

Sencer, B, 2016, “COORDINATED MULTI-AXIS MOTION GENERATION BASED ON FIR FILTERING”, American Society of Precision Engineering (ASPE) 2016 Spring Topical Meeting on Precision Mechatronic System Design and Control, April 20-22, 2016MIT, Cambridge, Massachusetts, USA.

Sencer, B., and Ishizaki, K., 2015, “Smooth polynomial interpolation for point-to-point trajectories with vibration avoidance”, IEEE’s IECON Conference, Yokohama, JAPAN.