Journal Articles 

  1. Otto, A. and Parmigiani, J.P., “Cutting Performance Comparison of Low-Kickback Saw Chain”, International Journal of Forest Engineering, Accepted March 05, 2018

  2. Alam, M., Parmigiani, J.P., Kruzic, J., “An Experimental Assessment of Methods to Predict Crack Deflection at an Interface”, Engineering Fracture Mechanics, 181, 116-129, 2017

  3. Wright, T.J., Hyder, I., Kim, D., Parmigiani, J.P., “A Sensitivity Study of Hashin Damage Parameters”, Aircraft Engineering and Aerospace Technology: An International Journal, 89(2), 274-279, 2017.

  4. Alam, M., Grimm, B., Parmigiani, J.P.,” Effect of Incident Angle on Crack Propagation at Interfaces”, Engineering Fracture Mechanics, Accepted on 09 May 2016.

  5. Hyder, I., Froemming, T., Daniels, M., Bay, B.K., Beattie, W.C., Parmigiani, J.P., “Mode III Loading of Composite Panels”, Journal of Aircraft, 53(2), 343-350, 2016.

  6. Otto, A. and Parmigiani, J.P., “Velocity, Depth-of-Cut, and Physical Property Effects on Saw Chain Cutting”, BioResources, 10.4, 7273-7291, 2015.

  7. Bingham, B.C. and Parmigiani, J.P,,”The Use of ECM Capsules for the Machining of Inconel and Titanium”, Journal of Manufacturing Technology Research, 6:3-4, 2015

  8. Robinson, T.A., Calvo-Amodio, J., Parmigiani, J.P., and Burton, V.T., “Capstone Design as an Individual Writing Experience”, International Journal of Engineering Education: 31:6B, pp 1902-1923, 2015

  9. Arnold, D. and Parmigiani, J.P., “A Study of Chainsaw Kickback”, Forest Products Journal, 65(5), 232-238, 2015.

10. Atanasov, A., Sargent, J.L., Parmigiani, J.P., Palme, R., and Diggs, H., “Characterization of Train Induced Vibrations and their Effect on the Reproductive Success of Laboratory Mice”, Journal of the American Association of Laboratory Animal Science, 54(6), 737-744, 2015

11. Summers, M.P. and Parmigiani, J.P., “A Water Soluable Additive to Suppress Respirable Dust from Concrete-Cutting Chainsaws: A Case Study”, Journal of Occupational and Environmental Hygiene, 12:4, D29-D34, 2015

12. Summers, M.P. and Parmigiani, J.P. “The Dynamic Shear Modulus of Blubber for Selected Large Whale Species”, Biorheology, 51, 399-408, 2014

13. Strom, J.L. and Parmigiani, J.P., “A Study of Transition of Crack Path at Bi-material Interfaces”, Engineering Fracture Mechanics, 115, pp. 13-21, 2014

14. Hyder, I., Arnold, D., Calvo-Amodio, J., and Parmigiani, J.P., “Using Graduate Assistants as Project Advisors for Externally-Sponsored Capstone Design Projects”, International Journal of Engineering Education, 30(1) pp. 101-111, 2014

15. Gregg, P.M., de Silva, S.L., Grosfils, E.B., Parmigiani, J.P., Catastrophic caldera-forming eruptions: Thermomechanics and implications for eruption triggering and maximum caldera dimensions on Earth, Journal of Volcanology and Geothermal Research, 241-242, (1), pp 1-12, 2012.

16. Sherrett, B. and Parmigiani, J.P., “Implementation of the HoQ as a Tool to Assess Products of Design in Capstone Design Courses”, International Journal of Engineering Education, Vol. 27, (6), pp 1324-1332, 2011

17. Parmigiani, J.P. and Thouless, M.D., “The Effects of Cohesive Strength and Toughness on Mixed-Mode Delamination of Beam-Like Geometries”, Engineering Fracture Mechanics, 74(17), pp. 2675-2699, 2007

18. Parmigiani, J.P. and Thouless, M.D., The Roles of Toughness and Cohesive Strength on Crack Deflection at Interfaces, Journal of the Mechanics and Physics of Solids, 54(2), pp. 266-287, 2006

Conference Papers

  1. Rawlings, T., Carpenter, K., and Parmigiani, J.P. “Experimental Specimen for Classification of Matrix Compression Damage in Carbon Fiber Reinforced Polymers” submitted,  ASME 2018 International Mechanical Engineering Congress & Exposition, Pittsburgh, PA.

  2. McKinley, T., Carpenter, K, and Parmigiani, J.P. “Development of Novel Compact Compression Specimen for Matrix Compression Damage Initiation and Propagation Behavior in Fiber Reinforced Composites” submitted, ASME 2018 International Mechanical Engineering Congress & Exposition, Pittsburgh, PA.

  3. Aerne, N., Rawlings, T., and Parmigiani, J.P. “The Effect of Temperature, Thickness, and Working Time on Adhesive Properties” submitted,  ASME 2018 International Mechanical Engineering Congress & Exposition, Pittsburgh, PA.

  4. LeRoux, S and Parmigiani, J.P. “The Unintended Consequences of Capstone as a Writing Intensive Course”, accepted, Capstone Design Conference 2018, Rochester, NY, June 4-6, 2018

  5. McGuire, M., Shannon, E. and Parmigiani, J.P., “Creation of a Test Machine for the Scientific Investigation of Chain Shot”, accepted, 20th International Conference on Forest Engineering and Nature (ICFEN 2018), Rome, Italy.

  6. Daniels, M.A., Rawlings, T., Parmigiani, J.P., “Experimental Specimen Selection for Stress-Displacement Behavior and Crack Initiation in Fiber Reinforced Composites, ASME 2017 International Mechanical Engineering Congress & Exposition, Houston, Texas

  7. Aerne N., Rawlings, T., Parmigiani, J.P., “Adhesive Properties Subject to Temperature Testing for Cohesive Zone Modeling, ASME 2017 International Mechanical Engineering Congress & Exposition, Houston, Texas

  8. Daniels, M.A., Rawlings, T., Parmigiani, J.P., “Selection and Validation for Determining Model Inputs for Matrix Compression Damage Propagation in Fiber Reinforced Composites, ASME 2016 International Mechanical Engineering Congress & Exposition, Phoenix, Arizona

  9. Meraz, J., Aerne, N., Rawlings, T., Parmigiani, J.P., “Temperature Chamber for Adhesive Bonding Properties from Mode Specific Testing Specimens”, ASME 2016 International Mechanical Engineering Congress & Exposition, Phoenix, Arizona

  10. Suryan, L., Daniels, M., Parmigiani, J.P.,  “Effects of Layup and Matrix Toughness on Modeling Notched Carbon Fiber Panels in Out-of-Plane Bending,” Proceedings of ASME 2015 International Mechanical Engineering Congress & Exposition, Houston, Texas

  11. Ostergaard, H., Dailey, P., Alam, M., Parmigiani, J.P., “Permeability Testing of Ceramic Foam Filters”, Proceedings of ASME 2015 International Mechanical Engineering Congress & Exposition, Houston, Texas

  12. Daniels,M.A., J Suryan,L.J., Parmigiani, J.P., “Effects of Finite Element Damage Modeling Parameters in Carbon Fiber Panels Under Mode III Loading”, Proceedings of ASME 2015 International Mechanical Engineering Congress & Exposition, Houston, Texas.

  13. Foglesong, T., Arlitt, R., Stone, R., Parmigiani, J.P., “Model-Based Design to support Complex Systems implementation as a result of Reverse Engineering”, International Conference on Complex Systems Engineering, University of Connecticut, 2015

  14. Alam, M., Parmigiani, J.P., “Crack propagation at bi-material interfaces”, Proceedings in Applied Mathematics and Mechanics, 15, 2015

  15. Daniels, M., Suryan, L., Hyder, I. , and Parmigiani, J.P. , Mesh Selection for Progressive Failure Modeling of Carbon Fiber Panels in Mode III Shear using an Explicit Finite Element Solver , Proceedings of ASME 2014 International Mechanical Engineering Congress & Exposition, Montreal, Canada.

  16. Ostergaard, H. and Parmigiani J.P., Design of a Human Powered Flour Mill for Educational and Community Events, Proceedings of ASME 2014 International Mechanical Engineering Congress & Exposition, Montreal, Canada.

  17. Suryan, L., Atanasov, A., Daniels, M, and Parmigiani, J.P., “Effective Finite Element Modeling of Mode III Failure in Composites”, Proceedings of ASME 2014 International Mechanical Engineering Congress & Exposition, Montreal, Canada

  18. Foglesong, T., Stone, R., Parmigiani, J.P., “Dynamics Modeling to Inform Design Optimization, ASME 2014 International Design Engineering Technical Conferences Design Education Conference  IDETC/DEC, Buffalo, NY, 2014

  19. Parmigiani, J.P., Calvo-Amodio, J., and Robinson, T.A., ”Acquiring a Consistent Source of Quality Capstone Projects”, Proceedings of the 2014 Capstone Design Conference, Columbus, OH, 2014

  20. Robinson, T.A., Calvo-Amodio, J., and Parmigiani, J.P., “Capstone Design as an Individual Writing Experience”, Proceedings of the 2014 Capstone Design Conference, Columbus, OH, 2014

  21. Bingham, B. and Parmigiani, J.P. “The Effect of Electrolyte Flow Slots in Tooling Electrodes on Final Anode Surface in Electrochemical Machining”, Proceedings of the COMSOL Conference 2013, Boston, MA 2013

  22. Bingham, B. and Parmigiani, J.P. “The Design and Fabrication of an Electrochemical Machining Test Apparatus”, Proceedings of ASME 2013 International Mechanical Engineering Congress & Exposition, San Diego, CA

  23. Otto, A. and Parmigiani, J.P. “Test Apparatus for Powered Saw Chain Systems”, Proceedings of ASME 2013 International Mechanical Engineering Congress & Exposition, San Diego, CA

  24. Hopple, W. and Parmigiani, J.P. “Design and Manufacture of a Solar-Electric Snow Melting Device for Making Potable Water on Mt. Rainier”, Proceedings of ASME 2013 International Mechanical Engineering Congress & Exposition, San Diego, CA

  25. Atanasov, A., Wright, T.J., and Parmigiani, J.P. “Improvement on the Analysis of a Finite Element Composites Model”, Proceedings of ASME 2013 International Mechanical Engineering Congress & Exposition, San Diego, CA

  26. Hyder, I., Wright T., Parmigiani, J.P.  “Mesh Selection for Modeling Progressive Damage in Mode III Shear for Composite Fiber Panels”, Proceedings of SAMPE, Long Beach, CA 2013

  27. Koski,W.C. and Parmigiani, J.P. “Identification of Key Parameters for Accurate Modeling of Composite Beams”, Proceedings of SAMPE Tech, Charleston, SC, 2012.

  28. Grimm, B. and Parmigiani, J.P., “The Role of Strength in Determining Composite Material Toughness Using the Interface Indentation Fracture Test, Proceedings of the ASME 2012 International Mechanical Engineering Congress & Exposition, Houston, TX, 2012

  29. Hortnagl, J.G. and Parmigiani, J.P., “The Oregon State University Mini-Malter”, Proceedings of the ASME 2012 International Mechanical Engineering Congress & Exposition, Houston, TX, 2012

  30. Grimm, B., Cathcart, P.B., Elgin, R.C., Lahneman, B.A., Meshnik, G.L, Parmigiani,J.P., “Autonomous Unmanned Aerial Vehicle System for Controlling Pest Bird Populations in Vineyards”, Proceedings of the ASME 2012 International Mechanical Engineering Congress & Exposition, Houston, TX, 2012

  31. Phan, A.V.M. and Parmigiani, J.P., “A Device for Performing Controlled Cutting Operations”, Proceedings of the ASME 2012 International Mechanical Engineering Congress & Exposition, Houston, TX, 2012

  32. Arnold, D.D., Parmigiani, J.P.,” Using Graduate Assistants as Project Advisers for Industry-Sponsored Capstone Design Projects”, Proceedings of the 2012 Capstone Design Conference, Champaign-Urbana, IL, 2012.

  33. Parmigiani, J.P., Kennedy, T.C., and Wright, T.J., “Mesh Dependency in Progressive Failure Modeling of Notched Laminates Under Out-of-Plane Bending”, Proceedings of the 53rd Structures, Structural Dynamics, and Materials Conference (SDM), Honolulu, HI, 2012.

  34. Wright, T.J. and Parmigiani, J.P. “Implicit versus Explicit Approaches to FEA Modeling of Notched Composite Panels”, SAMPE, Baltimore, MD, 2012

  35. Arnold, D.D., Parmigiani, J.P., “An Algorithm for Detecting the Occurrence of Chainsaw Kickback”, Proceedings of the ASME 2011 International Mechanical Engineering Congress & Exposition, Denver, CO, 2011

  36. Phan, A.V.M., Summers, M.P., Parmigiani, J.P., “Optimization of Grinding Media Performance Parameters”, Proceedings of the ASME 2011 International Mechanical Engineering Congress & Exposition, Denver, CO, 2011

  37. Sherrett, B. and Parmigiani, J.P. “The Development of a Framework for Investigating the Effectiveness of Capstone Course Curricular Changes”, Proceedings of the ASME 2011 International Design Engineering Technical Conferences Design Education Conference  IDETC/DEC, Washington D.C., 2011

  38. Zenier, S.H., and Parmigiani, J.P. “Viscoelastic Characterization of Minke Whale Blubber for Tracking Tag Simulation”, Proceedings of the ASME 2011 Summer Bioengineering Conference, Farmington, PA, 2011

  39. Sherrett, B. and Parmigiani, J.P. “Implementation of the House of Quality as a Guiding Tool for Students and Faculty in Senior Capstone Design Courses”, Proceedings of the 2010 Capstone Design Conference, Boulder, CO, 2010

  40. M. D. Thouless and J. P. Parmigiani, “Mixed-mode Cohesive-zone Models for Delamination and Deflection in Composites”, Proceedings of the 28th Risø International Symposium on Material Science: Interface Design of Polymer matrix Composites, Roskilde, Denmark, 2007, pp 93-111

  41. Parmigiani, J.P., Sastry, A.M., Thomas, F.I.M., “Fibrous Reinforcement in Marine Invertebrates: Mechanical Response of Biological Porous Materials”, Proceedings of the 16th American Society of Composites Technical Conference, Blacksburg, VA, CDROM, 2001.

  42. Parmigiani,J.P. and Ovaert,T.C., “The Transient Temperature Distribution in a Heavy Duty Drum Brake System During Fatigue Crack Testing”, SAE Technical Paper 2000-01-0441, 2000.

  43. Parmigiani, J. P. and Ovaert, T.C., “Crack Resistance of Cast Iron Drums in Non-Asbestos Lining Systems”, SAE Technical Paper 1999-01-1337, 1999

  44. Parmigiani, J.P. and Kosco, J., “Joining of P/M Components”, SAE Technical Paper 1999-01-0889, 1999Publications of Conference Proceedings