OREGON STATE UNIVERSITY
Open search box
M.P Medeiros, D.R Lopes, A.P. Carvalho, A. Hohenwarter, M. Kawasaki, L. Cupertino‐Malheiros, R.B. Figueiredo*
"Unveiling the Effect of Grain Size on Biodegradation of Magnesium"
Advanced Engineering Materials (2024) 2401605.
I. Bibimoune*, E. Hirschmann, M.O. Liedke, A. Wagner, M. Kawasaki, T. Baudin, I. Mkinsi, K. Abib, Y. Huang, T.G. Langdon, D. Bradai
"Defect microstructure evolution in an immiscible composite Cu43% Cr alloy after high-pressure torsion and annealing using positron annihilation spectroscopy"
Metals and Materials International (2024).
K. Mukhtarova, M. Kawasaki, Z. Dankházi, M. Windisch, G.Z. Radnóczi, W. Serafimowicz, J. Gubicza*
"Nanostructuring of an additively manufactured CoCrFeNi multi-principal element alloy using severe plastic deformation: Comparison of two materials processed by different laser scan speeds"
Intermetallics 170 (2024) 108336.
K. Edalati* et al,
"Severe plastic deformation for producing Superfunctional ultrafine-grained and heterostructured materials: An interdisciplinary review"
Journal of Aloys and Compounds (2024) 174667.
L. Bhatta, I. Lee, R.B. Figueiredo, B.K. Bay, M. Kawasaki*
"Digital Image Correlation Analysis of Uniform Deformation and Necking in Solid-State Welded Nanocrystalline Aluminum via High-Pressure Torsion"
Advanced Engineering Materials (2024) 2400439.
R.B. Figueiredo*, M. Kawasaki, T.G. Langdon
"The Role of Grain Size in Achieving Excellent Properties in Structural Materials"
Journal of Materials Research and Technology 30 (2024) 3448-3462.
O.O. Mohamed, P. Bazarnik, Y. Huang, H. Azzeddine*, T. Baudin, F. Brisset, M. Kawasaki, T.G. Langdon
"Primary recrystallization of a magnesium hybrid material fabricated by high-pressure torsion"
MaterialsToday Communications 38 (2024) 108305.
J. Gubicza*, K. Mukhtarova, M. Kawasaki
"Nanostructuring of Additively Manufactured 316L Stainless Steel Using High-Pressure Torsion Technique: An X-ray Line Profile Analysis Study"
Materials 17 (2024) 454.
K.-D. Liss*, J.-K. Han, M. Blankenburg, U. Lienert, S. Harjo, T. Kawasaki, P. Xu, E. Yukutake, M. Kawasaki*
"Recrystallization of bulk nanostructured magnesium alloy AZ31 after severe plastic deformation: an in situ diffraction study"
Journal of Materials Science 59 (2024) 5831–5853.
J. Gubicza*, M. Kawasaki, Z. Dankházi, M. Windisch, M. El-Tahawy
"X-ray line profile analysis study on the evolution of the microstructure in additively manufactured 316L steel during severe plastic deformation"
Journal of Materials Science 59 (2024) 6008–6023.
I. Lee, L. Bhatta, Y.-H. Wu, L. Daut, R.B. Figueiredo, K.-D. Liss, B.K. Bay, M.K. Santala, M. Kawasaki*
"The cold angular rolling process of copper sheets: unraveling plastic deformation behavior and unveiling microstructural transformations"
Advanced Engineering Materials 26 (2024) 2300742.
[Editorial]
M. Kawasaki
"Editorial: The June 2024 cover paper"
Journal of Materials Science 59 (2024) 9187–9188.
M. Kawasaki*, P. Kumar
"Preface to the special issue: Processing bulk nanostructured materials"
Journal of Materials Science 59 (2024) 5647–5650.
----------------------------------------------------------------------------
K. Kishore, A.K. Chandan*, P.T. Hung, S. Kumar, M. Ranjan, M. Kawasaki, J. Gubicza*
"Effect of Si on the evolution of plasticity mechanisms, grain refinement and hardness during high-pressure torsion of a non-equiatomic CoCrMnNi multi-principal element alloy"
International Journal of Plasticity 169 (2023) 103720.
S. Doran, Y. Yan, L. Yang, J.-K. Han, D. Chen, K. Wang, Y. Chen, M. Kawasaki, T. Chen*
"Microstructure and micromechanical responses of bulk nanostructured high entropy alloy after heavy-ion irradiation at 500° C"
Scripta Materialia 235 (2023) 115628.
R.B. Figueiredo*, M. Kawasaki, T.G. Langdon
"Seventy years of Hall-Petch, ninety years of superplasticity and a generalized approach to the effect of grain size on flow stress"
Progress in Materials Science 137 (2023) 101131.
M. Kawasaki*, J.-K. Han, X. Liu, S.-C. Moon, K.-D. Liss*
"Synchrotron High-Energy X-ray & Neutron Diffraction, and Laser-Scanning Confocal Microscopy: In-Situ Characterization Techniques for Bulk Nanocrystalline Metals"
Materials Transactions 64 (2023) 1683-1694.
H. Shahmir*, M.S. Mehranpour, M. Kawasaki, T.G. Langdon*
"Superplasticity in Severely Deformed High-Entropy Alloys"
Materials Transactions 64 (2023) 1526-1536.
D.-H. Lee*, I.-C. Choi*, M. Kawasaki, T.G. Langdon, J.-i. Jang*
"A Review of Recent Research on Nanoindentation of High-Entropy Alloys Processed by High-Pressure Torsion"
Materials Transactions 64 (2023) 1551-1565.
M.P. Medeiros, D.R. Lopes, M. Kawasaki, T.G. Langdon, R.B. Figueiredo*
"An Overview on the Effect of Severe Plastic Deformation on the Performance of Magnesium for Biomedical Applications"
Materials 16(6) (2023) 2401.
L.M. Reis, A.P. Carvalho, I. Lee, Y.H. Wu, J.-K. Han, M.K. Santala, M. Kawasaki*, R.B. Figueiredo*
"Cold angular rolling process as a continuous severe plastic deformation technique"
Journal of Materials Science 58 (2023) 4621-4636.
A. Paul*, X. Liu, M. Kawasaki, K.-D. Liss*
"Inverted magnetic response in severe plastically deformed nanostructured high-entropy alloy"
Applied Physics Letters 122 (2023) 052402.
O.O. Mohamed, H. Azzeddine*, Y. Huang, T. Baudin, P. Bazarnik, F. Brisset, M. Kawasaki, T.G. Langdon
"Investigation of Microstructure and Texture Evolution in an AZ31/Mg–Gd Alloy Hybrid Metal Fabricated by High-Pressure Torsion"
Advanced Engineering Materials 25 (2023) 2201794.
X. Liu, J.-K. Han, Y. Onuki, Y.O. Kuzminova, S.A. Evlashin, M. Kawasaki, K.-D. Liss*
"In Situ Neutron Diffraction Investigating Microstructure and Texture Evolution upon Heating of Nanostructured CoCrFeNi High-Entropy Alloy"
Advanced Engineering Materials 25 (2023) 2201256.
M. Kawasaki (川崎 恵)*
"超微細粒金属材料の転位運動による構造的不均一性"
まてりあ (Materia) 62 (2023) 19-23.
----------------------------------------------------------------------------
M. Surendran, B. Zhao, G. Ren, S. Singh, A. Avishai, H. Chen, J.-K.g Han, M. Kawasaki, R. Mishra, J. Ravichandran*
"Quasi-epitaxial growth of BaTiS3 films"
Journal of Materials Research 37 (2022) 3481-3490.
P.T. Hung, M. Kawasaki, Á. Szabó, J.L. Lábár, Z. Hegedűs, J. Gubicza*
"Influence of Degree of Severe Plastic Deformation on Thermal Stability of an HfNbTiZr Multi-Principal Element Alloy Processed by High-Pressure Torsion"
Nanomaterials 12(19) (2022) 3371.
J.K. Han, K. Sugimoto, M. Kawasaki*, K.-D. Liss*
"Strain-dependent phase transformation mapping of diffusion-bonded nanocrystalline aluminum-magnesium by high-energy synchrotron X-rays"
Materials Letters 321 (2022) 132414.
S.P. Singh, A. Rijal, T. Straub, J.-K. Han, T. Kennerknecht, C. Eberl, M. Kawasaki, P. Kumar*
"Effect of high-pressure torsion on high cycle fatigue of commercially pure Cu: Some insights from formation of surface micro-cracks"
Materials Characterization 190 (2022) 112059.
K. Kishore, A.K. Chandan*, P.T. Hung, S. Kumar, M. Kawasaki, J. Gubicza*
"On the enhanced hardening ability and plasticity mechanisms in a novel Mn-added CoCrNi medium entropy alloy during high-pressure torsion"
Journal of Alloys and Compounds 904 (2022) 163951.
K. Edalati*, A. Bachmaier, V.A. Beloshenko, Y. Beygelzimer, V.D. Blank, W.J. Botta, K. Bryła, J.Čížek, S. Divinski, N.A. Enikeev, Y. Estrin, G. Faraji, R.B. Figueiredo, M. Fuji, T. Furuta, T. Grosdidier, J. Gubicza, A. Hohenwarter, Z. Horita, J. Huot, Y. Ikoma, M. Janeček, M. Kawasaki, P. Krǎl, S. Kuramoto, T.G. Langdon, D.R. Leiva, V.I. Levitas, A. Mazilkin, M. Mito, H. Miyamoto, T. Nishizaki, R. Pippan, V.V. Popov, E.N. Popova, G. Purcek, O. Renk, Á. Révész, X. Sauvage, H. Sena, V. Sklenicka, W. Skrotzki, B.B. Straumal, S. Suwas, L.S. Toth, N. Tsuji, R.Z. Valiev, G. Wilde, M.J. Zehetbauer, X. Zhu
"Nanomaterials by severe plastic deformation: Review of historical developments and recent advances"
Materials Research Letters 10(4) (2022) 163-256.
D. Hernández-Escobar*, M. Kawasaki, C.J. Boehlert
"Metal hybrids processed by high-pressure torsion: synthesis, microstructure, mechanical properties and developing trends"
International Materials Reviews (2021) 1-35.
M. Kawasaki*, J.-K. Han, X. Liu, Y. Onuki, Y.O. Kuzminova, S.A. Evlashin, A.M. Pesin, A.P. Zhilyaev, K.-D. Liss
"In situ heating neutron and X-ray diffraction analyses for revealing structural evolution during post-printing treatments of additive-manufactured 316L stainless steel"
Advanced Engineering Materials 24 (2022) 2100968.
A.K. Chandan*, K. Kishore, P.T. Hung, M. Ghosh, S.G. Chowdhury, M. Kawasaki, J. Gubicza*
"Effect of nickel addition on enhancing nano-structuring and suppressing TRIP effect in Fe40Mn40Co10Cr10 high entropy alloy during high-pressure torsion"
International Journal of Plasticity 150 (2022) 103193.
P.T. Hung, M. Kawasaki, J.-K. Han, Á. Szabó, J.L. Lábár, Z. Hegedűs, J. Gubicza*
"Thermal stability of nanocrystalline CoCrFeNi multi-principal element alloy: Effect of the degree of severe plastic deformation"
Intermetallics 142 (2022) 107445.
----------------------------------------------------------------------------
Y.O. Kuzminova*, EA Kudryavtsev, J.-K. Han, M. Kawasaki, S.A. Evlashin
"Phase and structural changes during heat treatment of additive manufactured CrFeCoNi high-entropy alloy"
Journal of Alloys and Compounds 889 (2021) 161495.
K.-D. Liss*, X Liu, X. Li, J.-K. Han, R.J. Dippenaar, M. Kawasaki
"On the thermal evolution of high-pressure torsion processed titanium aluminide"
Materials Letters 304 (2021) 130650.
J.-K. Han, X Liu, I. Lee, Y.O. Kuzminova, S.A. Evlashin, K.-D. Liss, M. Kawasaki*
"Structural evolution during nanostructuring of additive manufactured 316L stainless steel by high-pressure torsion"
Materials Letters 302 (2021) 130364.
Y. Zhao*, J.-M. Park, K. Murakami, S. Komazaki, M. Kawasaki, K. Tsuchiya, J.-Y. Suh, U. Ramamurty, J.-i Jang*
"Exploring the hydrogen absorption and strengthening behavior in nanocrystalline face-centered cubic high-entropy alloys"
Scripta Materialia 203 (2021) 114069.
G. Righi*, C.J. Ruestes, C.V. Stan, S.J. Ali, R.E. Rudd, M. Kawasaki, H.-S. Park, M.A. Meyers
"Towards the ultimate strength of iron: spalling through laser shock"
Acta Materialia 215 (2021) 117072.
A.K. Chandan*, P.T. Hung, K. Kishore, M. Kawasaki, J. Chakraborty, J. Gubicza*
"On prominent TRIP effect and non-basal slip in a TWIP high entropy alloy during high-pressure torsion processing"
Materials Characterization 178 (2021) 111284.
M.M. Castro*, L.A. Montoro, A. Isaac, M. Kawasaki, R.B. Figueiredo
"Mechanical mixing of Mg and Zn using high-pressure torsion"
Journal of Alloys and Compounds 869 (2021) 159302.
H. Azzeddine*, T. Baudin, A.-L. Helbert, F. Brisset, Y. Huang, M. Kawasaki, D. Bradai, T.G. Langdon
"A stored energy analysis of grains with shear texture orientations in Cu-Ni-Si and Fe-Ni alloys processed by high-pressure torsion"
Journal of Alloys and Compounds 864 (2021) 158142.
M. Surendran, H. Chen, B. Zhao, A.S. Thind, S. Singh, T. Orvis, H. Zhao, J.-K. Han, H. Htoon, M. Kawasaki, R. Mishra, J. Ravichandran*
"Epitaxial Thin Films of a Chalcogenide Perovskite"
Chemistry of Materials 33, 18 (2021) 7457-7464.
Y.O. Kuzminova*, D.G. Firsov, S.A. Dagesyan, S.D. Konev, S.N. Sergeev, A.P. Zhilyaev, M. Kawasaki, I.S. Akhatov, S.A. Evlashin
"Fatigue behavior of additive manufactured CrFeCoNi medium-entropy alloy"
Journal of Alloys and Compounds 863 (2021) 158609.
W. Zhao, J.-K. Han, Y.O. Kuzminova, S.A. Evlashin, A.P. Zhilyaev, A.M. Pesin, J.-i. Jang, K.-D. Liss, M. Kawasaki*
"Significance of grain refinement on micro-mechanical properties and structures of additively-manufactured CoCrFeNi high-entropy alloy"
Materials Science and Engineering A 807 (2021) 140898.
N.X. Zhang, M. Kawasaki, H. Ding*, T.G. Langdon*
"An examination of microstructural evolution and homogeneity in a magnesium AZ80 alloy processed by high-pressure torsion"
Materials Science and Engineering A 806 (2021) 140832.
N.X. Zhang, M. Kawasaki, Y. Huang*, T.G. Langdon
"An examination of microstructural evolution in a Pb-Sn eutectic alloy processed by high-pressure torsion and subsequent self-annealing"
Materials Science and Engineering A 802 (2021) 140653.
P.T. Hung, M. Kawasaki, J.-K. Han, J.L. Lábár, J. Gubicza*
"Microstructure evolution in a nanocrystalline CoCrFeNi multi-principal element alloy during annealing"
Materials Characterization 171 (2021) 110807.
----------------------------------------------------------------------------
J.-K. Han, K.-D. Liss, T.G. Langdon, J.-i. Jang, M. Kawasaki*
"Mechanical properties and structural stability of a bulk nanostructured metastable aluminum-magnesium system"
Materials Science and Engineering A 796 (2020) 140050.
P.T. Hung, M. Kawasaki, J.-K. Han, J.L. Lábár, J. Gubicza*
"Thermal stability of a nanocrystalline HfNbTiZr multi-principal element alloy processed by high-pressure torsion"
Materials Characterization 168 (2020) 110550.
J.-K. Han, J.-M. Park, W. Ruan, K.T. Carpenter, A. Tabei, J.-i. Jang, M. Kawasaki*
"Size effect on microstructural evolution and micromechanical responses of mechanically bonded aluminum and magnesium by high-pressure torsion"
Advanced Engineering Materials 22 (2020) 2070040.
D. Hernández-Escobar*, M. Kawasaki, C.J. Boehlert
"High-pressure torsion processing of Zn-3Mg alloy and its hybrid counterpart: A comparative study"
Journal of Alloys and Compounds 831 (2020) 154891.
Y. Zhao, X. Wang, T. Cao, J.-K. Han, M. Kawasaki, J.-i. Jang, H.N. Han, U. Ramamurty, L. Wang, Y. Xue*
"Effect of grain size on the strain rate sensitivity of CoCrFeNi high-entropy alloy"
Materials Science and Engineering A 782 (2020) 139281.
J.-K. Han, T. Herndon, J.-i. Jang, T.G. Langdon, M. Kawasaki*
"Synthesis of hybrid nanocrystalline alloys by mechanical bonding through high‐pressure torsion"
Advanced Engineering Materials 22 (2020) 1901289.
H. Azzeddine*, Y. Islem Bourezg, A.Y. Khereddine, T. Baudin, A.-L. Helbert, F. Brisset, M. Kawasaki, D. Bradai, T.G. Langdon
"An investigation of the stored energy and thermal stability in a Cu–Ni–Si alloy processed by high-pressure torsion"
Philosophical Magazine 100 (2020) 688-712.
D. Hernández-Escobar*, J. Marcus, J.-K. Han, R.R. Unicic, M. Kawasaki, C.J. Boehlert
"Effect of post-deformation annealing on the microstructure and micro-mechanical behavior of Zn–Mg hybrids processed by High-Pressure Torsion"
Materials Science and Engineering A 771 (2020) 138578.
M. Kawasaki, R.B. Figueiredo, A.P. Zhilyaev
"Editorial: Special Issue Celebrating Professor Terence G. Langdon's 80th Birthday"
Advanced Engineering Materials 22 (2020) 1901386.
W. Jiang, H. Zhou, Y. Cao*, J. Nie, Y. Li, Y. Zhao, M. Kawasaki, T.G. Langdon, Y. Zhu
"On the heterogeneity of local shear strain induced by high‐pressure torsion"
Advanced Engineering Materials 22 (2020) 1900477.
A. Rijal, S.P. Singh, J.-K. Han, M. Kawasaki, P. Kumar*
"Effect of high‐pressure torsion on hardness and electrical resistivity of commercially pure Cu"
Advanced Engineering Materials 22 (2020) 1900547.
M. Kawasaki*, S.-H. Jung, J.-M. Park, J. Lee, J.-i. Jang, J.-K. Han
"Mechanical bonding of aluminum hybrid alloy systems through high‐pressure torsion"
Advanced Engineering Materials 22 (2020) 201900483.
----------------------------------------------------------------------------
J.-K. Han, K.-D. Liss, T.G. Langdon, M. Kawasaki*
"Synthesis of a bulk nanostructured metastable Al alloy with extreme supersaturation of Mg"
Scientific Reports 9 (2019) 17186.
J. Gubicza*, P.T. Hung, M. Kawasaki, J.-K. Han, Y. Zhao, Y. Xue, J.L. Lábár
"Influence of severe plastic deformation on the microstructure and hardness of a CoCrFeNi high-entropy alloy: A comparison with CoCrFeNiMn"
Materials Characterization 154 (2019) 304-314.
J.-K. Han, J. Jang, T.G. Langdon, M. Kawasaki*
"Bulk-state reactions and improving the mechanical properties of metals through high-pressure torsion"
Materials Transactions 60 (7), (2019) 1131-1138.
M. Kawasaki, T.G. Langdon*
"The contribution of severe plastic deformation to research on superplasticity"
Materials Transactions 60 (7) (2019) 1123-1130.
J. Gubicza*, A. Heczel, M. Kawasaki, J.-K. Han, Y. Zhao, Y. Xue, S. Huang, J.L. Lábár
"Evolution of microstructure and hardness in Hf25Nb25Ti25Zr25 high-entropy alloy during high-pressure torsion"
Journal of Alloys and Compounds 788 (2019) 318-328.
X. Li, R.J. Dippenaar, J.-K. Han, M. Kawasaki, K.-D. Liss*
"Phase transformation and structure evolution of a Ti-45Al-7.5 Nb alloy processed by high-pressure torsion"
Journal of Alloys and Compounds, 787 (2019) 1149-1157.
D.-H. Lee, J.-M. Park, G. Yang, J. He, Z. Lu, J.-Y. Suh, M. Kawasaki*, U. Ramamurty*, J.-i. Jang*
"Nano-graining a particle-strengthened high-entropy alloy"
Scripta Materialia 163 (2019) 24–28.
D. Hernández-Escobar*, Z.U. Raman, H. Yilmazer, M. Kawasaki, C.J. Boehlert
"Microstructural evolution and intermetallic formation in Zn-Mg hybrids processed by high-pressure torsion"
Philosophical Magazine 99(5) (2019) 557-584.
----------------------------------------------------------------------------
J.-K. Han, D.K. Han, G.Y. Liang, J.-i. Jang*, T.G. Langdon, M. Kawasaki*
"Direct bonding of aluminum-copper metals through high-pressure torsion processing"
Advanced Engineering Materials 20 (2018) 1800642.
D.-H. Lee, I.-C. Choi, G. Yang, Z. Lu, M. Kawasaki, U. Ramamurty, R. Schwaiger*, J.-i. Jang*
"Activation energy for plastic flow in nanocrystalline CoCrFeMnNi high entropy alloy: A high temperature nanoindentation study"
Scripta Materialia 156 (2018) 129-133.
M. Kawasaki*, J.-K. Han, D.-H. Lee, J.-i. Jang, T.G. Langdon
"Fabrication of nanocomposites through diffusion bonding under high-pressure torsion"
Journal of Materials Research 33 (2018) 2700-2710.
M. Demirtas*, M. Kawasaki, H. Yanar, G. Purcek
"High temperature superplasticity and deformation behavior of naturally aged Zn-Al alloys with different phase compositions"
Materials Science and Engineering A 730 (2018) 73-83.
M. Kawasaki*
Book review: Defect Structure and Properties of Nanomaterials Second and Extended Edition, Jenȍ Gubicza (Ed.). Woodhead Publishing, Cambridge, UK, 2017, 410 pp. ISBN: 0081019173
Microscopy and Microanalysis, 24(3) (2018) 323-323.
A. Heczel*, M. Kawasaki, D. Ugi, J.-i. Jang, T.G. Langdon, J. Gubicza
"The influence of chemical heterogeneities on the local mechanical behavior of a high-entropy alloy: A micropillar compression study"
Materials Science and Engineering A 721 (2018) 165-167.
M. Kawasaki*, T.G. Langdon
"Superplasticity in ultrafine-grained materials"
Review in Advanced Materials Science 54 (2018) 46-55.
S.-H. Jung, J. Lee, M. Kawasaki*
"Effects of pre-strain on the aging behavior of Al 7075 alloy for hot-stamping capability"
Metals 8 (2018) 137(1-11).
J.-K. Han, X. Li, R. Dippenaar, K.-D. Liss, M. Kawasaki*
"Microscopic plastic response in a bulk nano-structured TiAl intermetallic compound processed by high-pressure torsion"
Materials Science and Engineering A 714 (2018) 84-92.
M. Kawasaki, T.G. Langdon*
"Fabrication of High Strength Hybrid Materials through the Application of High-Pressure Torsion"
Acta Physica Polonica A 134 (2018) 615-622.
J. Han, S-H. Kang, S-J. Lee, M. Kawasaki, H-J. Lee, D. Ponge, D. Raabe, Y-K. Lee*
"Superplasticity in a lean Fe-Mn-Al steel"
Nature Communications 8 (2018) 197.
----------------------------------------------------------------------------
M. Kawasaki*, T.G. Langdon
"Using severe plastic deformation to fabricate strong metal matrix composites"
Materials Research 20 (2017) 46-52.
P.H.R. Pereira, Y. Huang, M. Kawasaki, T.G. Langdon*
"An examination of the superplastic characteristics of Al–Mg–Sc alloys after processing"
Journal of Materials Research 32 (2017) 4541-4553.
D.-H. Lee, J.-A. Lee, Y. Zhao, Z. Lu, J.-Y. Suh, J.-Y. Kim, U. Ramamurty, M. Kawasaki*, T.G. Langdon, J.-I. Jang*
"Annealing effect on plastic flow in nanocrystalline CoCrFeMnNi high-entropy alloy: A nanomechanical analysis"
Acta Materiallia 140 (2017) 443-451.
R.B. Figueiredo, M. Kawasaki, T.G. Langdon*
"Developments in processing by severe plastic deformation at the 3rd Pan American Materials Congress"
JOM 69 (2017) 2022-2023.
J. Han, S-H. Kang, S-J. Lee, M. Kawasaki, H-J. Lee, D. Ponge, D. Raabe, Y-K. Lee*
"Superplasticity in a lean Fe-Mn-Al steel"
Nature Communications 8 (2017) 751(1-6).
H. Shahmir, T. Mousavi, J. He, Z. Lu, M. Kawasaki, T.G. Langdon*
"Microstructure and properties of a CoCrFeNiMn high-entropy alloy processed by equal-channel angular pressing"
Materials Science and Engineering A 705 (2017) 411-419.
N. Haghdadi*, A. Zarei-Hanzaki, M. Kawasaki, A.B. Phillion, P.D. Hodgson
"Effect of severe plastic deformation and subsequent silicon spheroidizing treatment on the microstructure and mechanical properties of an Al-Si-Mg alloy"
Advanced Engineering Materials 19(7) (2017) 1700064(1-8).
M. Kawasaki, J.-i. Jang*
"Micro-mechanical response of an Al-Mg hybrid system synthesized by high-pressure torsion"
Materials 10(6) (2017) 596.
A. Heczel, M. Kawasaki, J. L. Lábár, J.-i. Jang, T. G. Langdon, J. Gubicza*
"Defect structure and hardness in nanocrystalline CoCrFeMnNi high-entropy alloy processed by high-pressure torsion"
Journal of Alloys and Compounds 711 (2017) 143-154.
M. Kawasaki, H.-J. Lee, J.l. Jang, T.G. Langdon*
"Strengthening of metals through severe plastic deformation"
Reviews on Advanced Materials Science 48 (2017) 13-24.
H. Shahmir*, J. He, Z. Lu, M. Kawasaki, T.G. Langdon
"Evidence for superplasticity in a CoCrFeNiMn high-entropy alloy processed by high-pressure torsion"
Materials Science and Engineering A 685 (2017) 342-348.
J.-K. Han, H.-J. Lee, J.-I. Jang, M. Kawasaki*, T.G. Langdon
"Micro-mechanical and tribological properties of aluminum-magnesium nanocomposites processed by high-pressure torsion"
Materials Science and Engineering A 684 (2017) 318-327.
M. Kawasaki*, B. Ahn, P. Kumar, J.-i. Jang, T.G. Langdon
"Nano- and Micro-mechanical properties of ultrafine-grained materials processed by severe plastic deformation techniques"
Advanced Engineering Materials 19 (2017) 1600578(1-17).
----------------------------------------------------------------------------
H. Shahmir*, J. He, Z. Lu, M. Kawasaki, T.G. Langdon
"Effect of annealing on mechanical properties of a nanocrystalline CoCrFeNiMn high-entropy alloy processed by high-pressure torsion"
Materials Science and Engineering A 676 (2016) 294-303.
H.-J. Lee, J.-K. Han, S. Janakiraman, B. Ahn, M. Kawasaki*, T.G. Langdon
"Significance of grain refinement on microstructure and mechanical properties of an Al-3% Mg alloy processed by high-pressure torsion"
Journal of Alloys and Compounds 686 (2016) 998-1007.
B. Ahn, H.-J. Lee, I.-C. Choi, M. Kawasaki*, J.-I. Jang*, T.G. Langdon
"Micro-mechanical behavior of an exceptionally strong metal matrix nanocomposite processed by high-pressure torsion"
Advanced Engineering Materials 18 (2016) 1001-1008.
N.X. Zhang, N.Q. Chinh, M. Kawasaki, Y. Huang*, T.G. Langdon
"Self-annealing in a two-phase Pb-Sn alloy after processing by high-pressure torsion"
Materials Science and Engineering A 666 (2016) 350-359.
D.H. Lee, M.Y. Seok, Y. Zhao, I.C. Choi, J. He, Z. Lu, J.Y. Suh, U. Ramamurty, M. Kawasaki*, T.G. Langdon, J.I. Jang*
"Spherical nanoindentation creep behavior of nanocrystalline and coarse-grained CoCrFeMnNi high-entropy alloys"
Acta Materialia 109 (2016) 314-322.
M. Kawasaki*, B. Ahn, H.-J. Lee, A.P. Zhilyaev, T.G. Langdon
"Using high-pressure torsion to process an aluminum-magnesium nanocomposite through diffusion bonding"
Journal of Materials Research 31 (2016) 88-99.
N. Haghdadi*, A. Zarei-Hanzaki, H.R. Abedi, D. Abou-Ras, M. Kawasaki, A.P. Zhilyaev
"Evolution of microstructure and mechanical properties in a hypoeutectic Al-Si-Mg alloy processed by accumulative back extrusion"
Materials Science and Engineering A 651 (2016) 269-279.
S.-H. Bae, K.H. Jung, Y.-C. Shin, D.J. Yoon, M. Kawasaki*
"Development of mechanical properties in a CaO added AZ31 magnesium alloy processed by equal-channel angular pressing"
Materials Characterization 112 (2016) 105-112.
M. Kawasaki*, R.B. Figueiredo, T.G. Langdon
"The requirements for superplasticity with an emphasis on magnesium alloys"
Advanced Engineering Materials 18 (2016) 127-131.
M. Kawasaki*, T.G. Langdon
"Review: achieving superplastic properties in ultrafine-grained materials at high temperatures"
Journal of Materials Science 51 (2016) 19-32.
P. Kumar, M. Kawasaki, T.G. Langdon*
"Review: Overcoming the paradox of strength and ductility in ultrafine-grained materials at low temperatures"
Journal of Materials Science 51 (2016) 7-18.
----------------------------------------------------------------------------
A.A.C. Asselli, D.R. Leiva, J. Huot, M. Kawasaki, T.G. Langdon, W.J. Botta*
"Effects of equal-channel angular pressing and accumulative roll-bonding on hydrogen storage properties of a commercial ZK60 magnesium alloy"
International Journal of Hydrogen Energy 40 (2015) 16971-16976.
M. Kawasaki, T.G. Langdon*
"Developing superplasticity in ultrafine-grained metals"
Acta Physica Polonica A 128 (2015) 470-478.
D.H. Lee, I.C. Choi, M.Y. Seok, J. He, Z. Lu, J.Y. Suh, M. Kawasaki*, T.G. Langdon, J.I. Jang*
"Nanomechanical behavior and structural stability of a nanocrystalline CoCrFeNiMn high-entropy alloy processed by high-pressure torsion"
Journal of Materials Research 30 (2015) 2804-2815.
T. Uesugi, M. Kawasaki*, M. Ninomiya, Y. Kamiya, Y. Takigawa, K. Higashi
"Significance of Si impurities on exceptional room-temperature superplasticity in a high-purity Zn-22%-Al alloy"
Materials Science and Engineering A 645 (2015) 47-56.
H. Azzeddine*, M. Harfouche, L. Hennet, D. Thiaudiere, M. Kawasaki, D. Bradai, T.G. Langdon
"An X-ray absorption spectroscopy investigation of the local atomic structure in Cu–Ni–Si alloy after severe plastic deformation and ageing"
Philosophical Magazine 95 (2015) 2482-2490.
M. Kawasaki*, H.-J. Lee, T.G. Langdon
"Microstructural homogeneity and superplastic behavior in an aluminum-copper eutectic alloy processed by high-pressure torsion"
Journal of Materials Science 50 (2015) 6700-6712.
J. Park, K.H. Jung, G.A. Lee, M. Kawasaki, B. Ahn*
"Evolution of precipitate morphology during extrusion in Mg ZK60A alloy"
Archives of Metallurgy and Materials 60 (2015) 1423-1426.
M. Kawasaki, H.-J. Lee, M.Ch.Oh, B. Ahn*
"High temperature deformation flow of a ZK60A magnesium alloy after extrusion"
Archives of Metallurgy and Materials 60 (2015) 1327-1330.
X.H. An*, S.M. Zhu, Y. Cao, M. Kawasaki, X.Z. Liao, S.P. Ringer, J.F. Nie, T.G. Langdon, Y.T. Zhu
"Atomic-scale investigation of interface-facilitated deformation twinning in severely deformed Ag-Cu nanolamellar composites"
Applied Physics Letters 107 (2015) 011901.
B. Ahn, A.P. Zhilyaev, H.-J. Lee, M. Kawasaki*, T.G. Langdon
"Rapid synthesis of an extra hard metal matrix nanocomposite at ambient temperature"
Materials Science and Engineering A 635 (2015) 109-117.
F. Hadj Larbi, H. Azzeddine, T. Baudin, M.H. Mathon, F. Brisset, A.L. Helbert, M. Kawasaki*, D. Bradai, T.G. Langdon
"Microstructure and texture evolution in a Cu–Ni–Si alloy processed by equal-channel angular pressing"
Journal of Alloys and Compounds 638 (2015) 88–94.
T. Mungole, P. Kumar*, M. Kawasaki, T.G. Langdon
"The contribution of grain boundary sliding in tensile deformation of an ultrafine-grained aluminum alloy having high strength and high ductility"
Journal of Materials Science 50 (2015) 3549-3561.
H.-J. Lee, S.K. Lee, K.H. Jung, G.A. Lee, B. Ahn*, M. Kawasaki*, T.G. Langdon
"Evolution in hardness and texture of a ZK60A magnesium alloy processed by high-pressure torsion"
Materials Science and Engineering A 630 (2015) 90-98.
Y. Cao, Y.B. Wang, X.H. An, X.Z. Liao*, M. Kawasaki, S.P. Ringer, T.G. Langdon, Y.T. Zhu
"Grain boundary formation by remnant dislocations from the de-twinning of thin nano-twins"
Scripta Materialia 100 (2015) 98-101.
R.B. Figueiredo*, F.L. Sicupira, L.R.C. Malheiros, M. Kawasaki, D.B. Santos, T.G. Langdon
"Formation of epsilon martensite by high-pressure torsion in a TRIP steel"
Materials Science and Engineering A 625 (2015) 114-118.
I.C. Choi, D.H. Lee, B. Ahn, K. Durst, M. Kawasaki*, T.G. Langdon, J.I. Jang*
"Enhancement of strain-rate sensitivity and shear yield strength of a magnesium alloy processed by high-pressure torsion"
Scripta Materialia 94 (2015) 44-47.
----------------------------------------------------------------------------
T. Mungole, P. Kumar*, M. Kawasaki, T.G. Langdon
"A critical examination of the paradox of strength and ductility in ultrafine-grained metals"
Journal of Materials Research 29 (2014) 2534-2546.
I.C. Choi, B.G. Yoo, O. Kraft, R. Schwaiger, M.Y. Seok, M. Kawasaki*, T.G. Langdon, J.I. Jang*
"High-cycle fatigue behavior of Zn-22% Al alloy processed by high-pressure torsion"
Materials Science and Engineering A 618 (2014) 37-40.
E. El-Danaf, M. Kawasaki*, M. El-Rayes, M. Baig, J. Ali Mohammed, T.G. Langdon
"Mechanical properties and microstructure evolution in an aluminum 6082 alloy processed by high-pressure torsion"
Journal of Materials Science 49 (2014) 6597-6607.
M. Kawasaki*, R.B. Figueiredo, Y. Huang, T.G. Langdon
"Interpretation of hardness evolution in metals processed by high-pressure torsion"
Journal of Materials Science 49 (2014) 6586-6596.
M. Kawasaki*, T.G. Langdon
"Review: achieving superplasticity in metals processed by high-pressure torsion"
Journal of Materials Science 49 (2014) 6487-6496.
Y. Huang*, M. Kawasaki, A. Al-Zubaydi, T.G. Langdon
"Effect of anvil roughness on the flow patterns and hardness development in high-pressure torsion"
Journal of Materials Science 49 (2014) 6517-6528.
N.Q. Chinh, R.Z. Valiev, X. Sauvage, G. Varga, K. Havancsak, M. Kawasaki , B.B. Straumal, T.G. Langdon*
"Grain boundary phenomena in an ultrafine-grained Al-Zn alloy with improved mechanical behavior for micro-devices"
Advanced Engineering Materials 16 (2014) 1000-1009.
K. Yan, D. Bhattacharyya*, Q. Lian, S. Kabra, M. Kawasaki, D.G. Carr, M.D. Callaghan, M. Avdeev, H. Li, Y. Wang, X. Liao, T.G. Langdon, K.-D. Liss, R.J. Dippenaar
"Martensitic phase transformation and deformation behavior of Fe-Mn-C-Al twinning-induced plasticity steel during high-pressure torsion"
Advanced Engineering Materials 16 (2014) 927-932.
T.S. Cho, H.J. Lee, B. Ahn*, M. Kawasaki*, T.G. Langdon
"Microstructural evolution and mechanical properties in a Zn-Al eutectoid alloy processed by high-pressure torsion"
Acta Materialia 72 (2014) 67-79.
Y. Huang*, M. Kawasaki, T.G. Langdon
"An evaluation of the shearing patterns introduced by different anvil alignments in high-pressure torsion"
Journal of Materials Science 49 (2014) 3146-3157.
H. Azzeddine, B. Mehdi, L. Hennet, D. Thiaudiere, B. Alili, M. Kawasaki*, D. Bradai, T.G. Langdon
"An in situ synchrotron X-ray diffraction study of precipitation kinetics in a severely deformed Cu-Ni-Si alloy"
Materials Science and Engineering A 597 (2014) 288-294.
I.C. Choi, Y.J. Kim, B. Ahn, M. Kawasaki*, T.G. Langdon, J.I. Jang*
"Evolution of plasticity, strain-rate sensitivity and the underlying deformation mechanism in Zn-22% Al during high-pressure torsion"
Scripta Materialia 75 (2014) 102-105.
N. Haghdadi, A. Zarei-Hanzaki*, D. Abou-Ras, M.H. Maghsoudi, A. Ghorbani, M. Kawasaki
"An investigation into the homogeneity of microstructure, strain pattern and hardness of pure aluminum processed by accumulative back extrusion"
Materials Science and Engineering A 595 (2014) 179-187.
M. Kawasaki*
"Different models of hardness evolution in ultrafine-grained materials processed by high-pressure torsion"
Journal of Materials Science 49 (2014) 18-34.
Y. Cao, Y.B. Wang, X.H. An, X.Z. Liao*, M. Kawasaki, S.P. Ringer, T.G. Langdon, Y.T. Zhu
"Concurrent microstructural evolution of ferrite and austenite in a duplex stainless steel processed by high-pressure torsion"
Acta Materialia 63 (2014) 16-29.
----------------------------------------------------------------------------
C.H. Lu, B.A. Remington, B.R. Maddox, B. Kad, H.S. Park, M. Kawasaki, T.G. Langdon, M.A. Meyers*
"Laser compression of nanocrystalline tantalum"
Acta Materialia 61 (2013) 7767-7780.
Y. Huang*, M. Kawasaki, T.G. Langdon
"Influence of anvil alignment on shearing patterns in high-pressure torsion"
Advanced Engineering Materials 15 (2013) 747-755.
M. Kawasaki*, T.G. Langdon
"The many facets of deformation mechanism mapping and the application to nanostructured materials"
Journal of Materials Research 28 (2013) 1827-1834.
A.Y. Khereddine, F.H. Larbi, H. Azzeddine, T. Baudin, F. Brisset, A.L. Helbert, M.H. Mathon, M. Kawasaki*, D. Bradai, T.G. Langdon
"Microstructures and textures of a Cu–Ni–Si alloy processed by high-pressure torsion"
Journal of Alloys and Compounds 574 (2013) 361-367.
A.M. Jorge Jr*, E. Prokofiev, G.F. de Lima, E. Rauch, M. Veron, W.J. Botta, M. Kawasaki, T.G. Langdon
"An investigation of hydrogen storage in a magnesium-based alloy processed by equal-channel angular pressing"
International Journal of Hydrogen Energy 38 (2013) 8306-8312.
A.M. Jorge Jr*, E. Prokofiev, G.F. de Lima, E. Rauch, M. Veron, W.J. Botta, M. Kawasaki, T.G. Langdon
"An investigation of hydrogen storage in a magnesium-based alloy processed by equal-channel angular pressing"
International Journal of Hydrogen Energy 38 (2013) 8306-8312.
Y. Cao, Y.B. Wang, Z.B. Chen, X.Z. Liao*, M. Kawasaki, S.P. Ringer, T.G. Langdon, Y.T. Zhu
"De-twinning via secondary twinning in face-centered cubic alloys"
Materials Science and Engineering A 578 (2013) 110-114.
A.Y. Khereddine, F.H. Larbi, M. Kawasaki*, T. Baudin, D. Bradai, T.G. Langdon
"An examination of microstructural evolution in a Cu-Ni-Si alloy processed by HPT and ECAP"
Materials Science and Engineering A 576 (2013) 149-155.
M. Kawasaki, T.G. Langdon*
"Evaluating the flow processes in ultrafine-grained materials at elevated temperatures"
Materials Research - Ibero - American Journal of Materials 16(3) (2013) 565-570.
N.X. Zhang*, M. Kawasaki, Y. Huang, T.G. Langdon
"Microstructural evolution in two-phase alloys processed by high-pressure torsion"
Journal of Materials Science 48 (2013) 4582-4591.
T. Mungole, N. Nadammal, K. Dawra, P. Kumar*, M. Kawasaki, T.G. Langdon
"Evolution of microhardness and microstructure in a cast Al–7 % Si alloy during high-pressure torsion"
Journal of Materials Science 48 (2013) 4671-4680.
M. Kawasaki*, T.G. Langdon
"The significance of grain boundary sliding in the superplastic Zn–22% Al alloy processed by ECAP"
Journal of Materials Science 48 (2013) 4730-4741.
Z. Hegedűs, J. Gubicza*, M. Kawasaki, N.Q. Chinh, J.L. Lábár, T.G. Langdon
"Stability of the ultrafine-grained microstructure in silver processed by ECAP and HPT"
Journal of Materials Science 48 (2013) 4637-4645.
J. Wongsa-Ngam*, M. Kawasaki, T.G. Langdon
"A comparison of microstructures and mechanical properties in a Cu–Zr alloy processed using different SPD techniques"
Journal of Materials Science 48 (2013) 4653-4660.
Y. Huang*, M. Kawasaki, T.G. Langdon
"An investigation of flow patterns and hardness distributions using different anvil alignments in high-pressure torsion"
Journal of Materials Science 48 (2013) 4533-4542.
M. Kawasaki*, J. Foisse, T.G. Langdon
"Development of hardness homogeneity and superplastic behavior in an aluminum–copper eutectic alloy processed by high-pressure torsion"
Materials Science and Engineering A 561 (2013) 118-125.
Z. Hegedűs, J. Gubicza*, M. Kawasaki, N.Q. Chinh, K. Süvegh, T.G. Langdon
"High temperature thermal stability of ultrafine-grained silver processed by equal-channel angular pressing"
Journal of Materials Science 48 (2013) 1675-1684.
----------------------------------------------------------------------------