Mechanical Properties of Materials Laboratory

Mechanical properties of commercially available nylon sutures in the United States, Callahan, T. L., Lear W., Kruzic J. J., and Maughan C. B. , Journal of Biomedical Materials Research Part B: Applied Biomaterials, Volume 105, Issue 4, p.815-819, (2017)

Buried absorbable polyglactin 910 sutures do not result in stronger wounds in porcine full thickness skin incisions, Townsend, K, Lear W., Robertson B. L., and Kruzic J. J. , Journal of the Mechanical Behavior of Biomedical Materials, Volume 63, p.386-389, (2016)

Designed heterogeneities improve the fracture reliability of a Zr-based bulk metallic glass, Li, B. S., H. Shakur Shahabi, Scudino S., Eckert J., and Kruzic J. J. , Materials Science and Engineering A, Volume 646, p.242-248, (2015)

Intergranular Nanostructure Effects on Strength and Toughness of Si3N4, Mikijelj, B., Nawaz Z., Kruzic J. J., Idrobo J., Swab J. J., Ozcoban H., Jelitto H., Schneider G. A., Fett T., and Liu Y. , Journal of the American Ceramic Society, Volume 98, Issue 5, p.1650-1657, (2015)

Mechanical properties of suture materials in general and cutaneous surgery, Naleway, S. E., Lear W., Kruzic J. J., and Maughan C. B. , Journal of Biomedical Materials Research Part B: Applied Biomaterials, Volume 103, Issue 4, p.735-742, (2015)

Detection of dentinal cracks using contrast-enhanced micro-computed tomography, Landrigan, M. D., Flatley J. C., Turnbull T. L., Kruzic J. J., Ferracane J. L., Hilton T. J., and Roeder R. K. , Journal of the Mechanical Behavior of Biomedical Materials, Feb, Volume 3, Number 2, p.223-227, (2010)

Assessment of the fatigue transformation zone in bulk metallic glasses using positron annihilation spectroscopy, Liu, M., Vallery R. S., Gidley D. W., Launey M. E., and Kruzic J. J. , Journal of Applied Physics, May, Volume 105, Number 9, (2009)

Assessment of the fatigue transformation zone in bulk metallic glasses using positron annihilation spectroscopy, Liu, M., Vallery R. S., Gidley D. W., Launey M. E., and Kruzic J. J. , Journal of Applied Physics, May, Volume 105, Number 9, (2009)

Effects of free volume changes and residual stresses on the fatigue and fracture behavior of a Zr-Ti-Ni-Cu-Be bulk metallic glass, Launey, M. E., Busch R., and Kruzic J. J. , Acta Materialia, Feb, Volume 56, Number 3, p.500-510, (2008)

Characterization of fatigue-induced free volume changes in a bulk metallic glass using positron annihilation spectroscopy, Vallery, R. S., Liu M., Gidley D. W., Launey M. E., and Kruzic J. J. , Applied Physics Letters, Dec, Volume 91, Number 26, (2007)

Characterization of fatigue-induced free volume changes in a bulk metallic glass using positron annihilation spectroscopy, Vallery, R. S., Liu M., Gidley D. W., Launey M. E., and Kruzic J. J. , Applied Physics Letters, Dec, Volume 91, Number 26, (2007)

Quantification of free volume differences in a Zr₄₄Ti₁₁Ni₁₀Cu₁₀Be₂₅ bulk amorphous alloy, Launey, M. E., Kruzic J. J., Li C., and Busch R. , Applied Physics Letters, Jul, Volume 91, Number 5, (2007)

Quantification of free volume differences in a Zr₄₄Ti₁₁Ni₁₀Cu₁₀Be₂₅ bulk amorphous alloy, Launey, M. E., Kruzic J. J., Li C., and Busch R. , Applied Physics Letters, Jul, Volume 91, Number 5, (2007)

Fatigue of bulk metallic glasses: Role of free volume, Kruzic, J. J., Launey M. E., and Busch R. , Bulk Metallic Glasses, TMS Annual Meeting, p.45-50, (2006)

Influence of structural relaxation on the fatigue behavior of a Zr_41.25Ti_13.75Ni₁₀CU_12.5Be_22.5 bulk amorphous alloy, Launey, M. E., Busch R., and Kruzic J. J. , Scripta Materialia, Feb, Volume 54, Number 3, p.483-487, (2006)

On the growth of small fatigue cracks in gamma-based titanium aluminides, Campbell, J. P., Kruzic J. J., Lillibridge S., Rao K. T. V., and Ritchie R. O. , Scripta Materialia, Sep, Volume 37, Number 5, p.707-712, (1997)