Found 207 results
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 
Bulk Metallic Glasses
The effect of low-temperature structural relaxation on free volume and chemical short-range ordering in a Au49Cu26.9Si16.3Ag5.5Pd2.3 bulk metallic glass, Evenson, Z., Koschine T., Wei S., Gross O., Bednarcik J., Gallino I., Kruzic J. J., Raetzke K., Faupel F., and Busch R. , Scripta Materialia, Volume 103, p.14-17, (2015)
Linking structure to fragility in bulk metallic glass-forming liquids, Wei, S, Stolpe M, Gross O, Evenson Z, Gallino I, Hembree W, Bednarcik J, Kruzic JJ, and Busch R , Applied Physics Letters, Volume 106, Issue 18, p.181901, (2015)
Designed heterogeneities improve the fracture reliability of a Zr-based bulk metallic glass, Li, B. S., H. Shakur Shahabi, Scudino S., Eckert J., and Kruzic J. J. , Materials Science and Engineering A, Volume 646, p.242-248, (2015)
A highly efficient degradation mechanism of methyl orange using Fe-based metallic glass powders, Xie, S. H., Huang P., Kruzic J. J., Zeng X. R., and Qian H. X. , Scientific Reports, Volume 6, p.21947, (2016)
Bulk Metallic Glasses as Structural Materials: A Review, Kruzic, J. J. , Advanced Engineering Materials, Volume 18, Issue 8, p.1308–1331, (2016)
Ceramics
First- and second-order approaches for the direct determination of bridging stresses from R-curves, Fuenfschilling, S., Fett T., Gallops S. E., Kruzic J. J., Oberacker R., and Hoffmann M. J. , Journal of the European Ceramic Society, Apr, Volume 30, Number 6, p.1229-1236, (2010)
Mechanisms of toughening in silicon nitrides: The roles of crack bridging and microstructure, Fuenfschilling, S., Fett T., Hoffmann M. J., Oberacker R., Schwind T., Wippler J., Boehlke T., Oezcoban H., Schneider G. A., Becher P. F., et al. , Acta Materialia, Jun, Volume 59, Number 10, p.3978-3989, (2011)
R-Curves from Compliance and Optical Crack-Length Measurements, Fuenfschilling, S., Fett T., Oberacker R., Hoffmann M. J., Oezcoban H., Jelitto H., Schneider G. A., and Kruzic J. J. , Journal of the American Ceramic Society, Sep, Volume 93, Number 9, p.2814-2821, (2010)
Crack-Tip Toughness from Vickers Crack-Tip Opening Displacements for Materials with Strongly Rising R-Curves, Fuenfschilling, S., Fett T., Oberacker R., Hoffmann M. J., Schneider G. A., Becher P. F., and Kruzic J. J. , Journal of the American Ceramic Society, Jun, Volume 94, Number 6, p.1884-1892, (2011)
Fatigue threshold R-curves predict small crack fatigue behavior of bridging toughened materials, Gallops, S., Fett T., Ager J. W., and Kruzic J. J. , Acta Materialia, Dec, Volume 59, Number 20, p.7654-7661, (2011)
Fatigue Threshold R-Curve Behavior of Grain Bridging Ceramics: Role of Grain Size and Grain-Boundary Adhesion, Gallops, S., Fett T., and Kruzic J. J. , Journal of the American Ceramic Society, Aug, Volume 94, Number 8, p.2556-2561, (2011)
Fatigue Crack Growth Behavior of Silicon Nitride: Roles of Grain Aspect Ratio and Intergranular Film Composition, Greene, R. B., Fuenfschilling S., Fett T., Hoffmann M. J., and Kruzic J. J. , Journal of the American Ceramic Society, Jan, Volume 96, Number 1, p.259-265, (2013)
A direct comparison of non-destructive techniques for determining bridging stress distributions, Greene, R. B., Gallops S., Fuenfschilling S., Fett T., Hoffmann M. J., Ager J. W., and Kruzic J. J. , Journal of the Mechanics and Physics of Solids, Aug, Volume 60, Number 8, p.1462-1477, (2012)
Deducing the Fatigue Crack Growth Rates of Natural Flaws in Silicon Nitride Ceramics: Role of R-Curves, Haertelt, M., Fuenfschilling S., Schwind T., Riesch-Oppermann H., Fett T., and Kruzic J. J. , Journal of the American Ceramic Society, Aug, Volume 96, Number 8, p.2593-2597, (2013)
Fatigue threshold R-curves for predicting reliability of ceramics under cyclic loading, Kruzic, J. J., Cannon R. M., Ager J. W., and Ritchie R. O. , Acta Materialia, May, Volume 53, Number 9, p.2595-2605, (2005)
Crack-size effects on cyclic and monotonic crack growth in polycrystalline alumina: Quantification of the role of grain bridging, Kruzic, J. J., Cannon R. M., and Ritchie R. O. , Journal of the American Ceramic Society, Jan, Volume 87, Number 1, p.93-103, (2004)
Effects of moisture on grain-boundary strength, fracture, and fatigue properties of alumina, Kruzic, J. J., Cannon R. M., and Ritchie R. O. , Journal of the American Ceramic Society, Aug, Volume 88, Number 8, p.2236-2245, (2005)
Determining the toughness of ceramics from Vickers indentations using the crack-opening displacements: An experimental study, Kruzic, J. J., and Ritchie R. O. , Journal of the American Ceramic Society, Aug, Volume 86, Number 8, p.1433-1436, (2003)
The utility of R-curves for understanding fracture toughness-strength relations in bridging ceramics, Kruzic, J. J., Satet R. L., Hoffmann M. J., Cannon R. M., and Ritchie R. O. , Journal of the American Ceramic Society, Jun, Volume 91, Number 6, p.1986-1994, (2008)
Ambient to high-temperature fracture toughness and cyclic fatigue behavior in Al-containing silicon carbide ceramics, Yuan, R., Kruzic J., Zhang X. F., De Jonghe L. C., and Ritchie R. O. , Acta Materialia, Dec, Volume 51, Number 20, p.6477-6491, (2003)
Fatigue Threshold R-curves Predict Fatigue Endurance Strength for Self-Reinforced Silicon Nitride, Greene, R. B., Fuenfschilling S., Fett T., Hoffmann M. J., and Kruzic J. J. , Journal of the American Ceramic Society, Feb, Volume 97, Number 2, p.577-583, (2014)
Fatigue Behavior, Bridging Stresses, and Fatigue Reliability in Silicon Nitride Ceramics, Greene, R. B., and Kruzic J. J. , ASME 2011 International Manufacturing Science and Engineering Conference, p.65–68, (2011)
Fatigue Reliability Predictions for Crack Bridging Materials, Gallops, S., and Kruzic J. J. , ASME 2011 Turbo Expo: Turbine Technical Conference and Exposition, p.163–167, (2011)
Understanding Crack Size Effects during Fatigue of Extrinsically Toughened Materials, Kruzic, J. J. , 12th International Conference on Fracture, Ottawa, Canada, (2009)
An Experimental Assessment of Using Crack-Opening Displacements to Determine Indentation Toughness from Vickers Indents, Kruzic, J. J., and Ritchie R. O. , Indentation Techniques in Ceramic Materials Characterization, Ceramic Transactions, Volume 156, p.83–91, (2004)
Determining worst-case fatigue thresholds for grain-bridging ceramics, Kruzic, J. J., Yuan R., Cannon R. M., and Ritchie R. O. , Materials Lifetime Science & Engineering, TMS Annual Meeting, p.61–68, (2002)
Fatigue Threshold R-curves for the Analysis of Short Fatigue Cracks, Kruzic, J. J. , Fatigue Crack Growth: Mechanisms, Behavior and Analysis, (2012)
Statistical analysis of fatigue crack propagation for natural flaws in silicon nitride, Haertelt, M., Riesch-Oppermann H., Kruzic J. J., and Kraft O. , 2nd International Conference of Engineering Against Fracture, (2011)
Fatigue of bridging ceramics: Understanding crack size effects, Kruzic, J. J., Cannon R. M., and Ritchie R. O. , 11th International Conference on Fracture, (2005)
Fatigue Threshold R-curves for Reliability Predictions in Bridging Materials, Kruzic, J. J., Cannon R. M., and Ritchie R. O. , 9th International Fatigue Congress, Atlanta, GA, (2006)
Intergranular Nanostructure Effects on Strength and Toughness of Si3N4, Mikijelj, B., Nawaz Z., Kruzic J. J., Idrobo J., Swab J. J., Ozcoban H., Jelitto H., Schneider G. A., Fett T., and Liu Y. , Journal of the American Ceramic Society, Volume 98, Issue 5, p.1650-1657, (2015)
Education
Improving Participation of Engineering Students Studying Abroad: An International Dual-Degree Program in Materials Science and Mechanical Engineering, Warnes, W. H., Kruzic J. J., Pratt C. C., Stehr C., Cann D. P., Gibbons B. J., Gallino I., Soldera F., Busch R., and Wallstrom L. , JOM, Jul, Volume 65, Number 7, p.840-845, (2013)
Fatigue
A highly fatigue resistant Zr-based bulk metallic glass, Naleway, S. E., Greene R. B., Gludovatz B., Dave N. K. N., Ritchie R. O., and Kruzic J. J. , Metallurgical and Materials Transactions A, Volume 44, Issue 13, (2013)
On the growth of small fatigue cracks in gamma-based titanium aluminides, Campbell, J. P., Kruzic J. J., Lillibridge S., Rao K. T. V., and Ritchie R. O. , Scripta Materialia, Sep, Volume 37, Number 5, p.707-712, (1997)
Fatigue threshold R-curves predict small crack fatigue behavior of bridging toughened materials, Gallops, S., Fett T., Ager J. W., and Kruzic J. J. , Acta Materialia, Dec, Volume 59, Number 20, p.7654-7661, (2011)
Fatigue Threshold R-Curve Behavior of Grain Bridging Ceramics: Role of Grain Size and Grain-Boundary Adhesion, Gallops, S., Fett T., and Kruzic J. J. , Journal of the American Ceramic Society, Aug, Volume 94, Number 8, p.2556-2561, (2011)
Fatigue Crack Growth Behavior of Silicon Nitride: Roles of Grain Aspect Ratio and Intergranular Film Composition, Greene, R. B., Fuenfschilling S., Fett T., Hoffmann M. J., and Kruzic J. J. , Journal of the American Ceramic Society, Jan, Volume 96, Number 1, p.259-265, (2013)
Deducing the Fatigue Crack Growth Rates of Natural Flaws in Silicon Nitride Ceramics: Role of R-Curves, Haertelt, M., Fuenfschilling S., Schwind T., Riesch-Oppermann H., Fett T., and Kruzic J. J. , Journal of the American Ceramic Society, Aug, Volume 96, Number 8, p.2593-2597, (2013)
Mechanical performance of novel bioactive glass containing dental restorative composites, Khvostenko, D., Mitchell J. C., Hilton T. J., Ferracane J. L., and Kruzic J. J. , Dental Materials, Nov, Volume 29, Number 11, p.1139-1148, (2013)
Predicting Fatigue Failures, Kruzic, J. J. , Science, Jul, Volume 325, Number 5937, p.156-158, (2009)
Understanding the Problem of Fatigue in Bulk Metallic Glasses, Kruzic, J. J. , Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science, Jun, Volume 42A, Number 6, p.1516-1523, (2011)
On the fatigue behavior of gamma-based titanium aluminides: Role of small cracks, Kruzic, J. J., Campbell J. P., and Ritchie R. O. , Acta Materialia, Feb, Volume 47, Number 3, p.801-816, (1999)
Fatigue threshold R-curves for predicting reliability of ceramics under cyclic loading, Kruzic, J. J., Cannon R. M., Ager J. W., and Ritchie R. O. , Acta Materialia, May, Volume 53, Number 9, p.2595-2605, (2005)
Crack-size effects on cyclic and monotonic crack growth in polycrystalline alumina: Quantification of the role of grain bridging, Kruzic, J. J., Cannon R. M., and Ritchie R. O. , Journal of the American Ceramic Society, Jan, Volume 87, Number 1, p.93-103, (2004)
Effects of moisture on grain-boundary strength, fracture, and fatigue properties of alumina, Kruzic, J. J., Cannon R. M., and Ritchie R. O. , Journal of the American Ceramic Society, Aug, Volume 88, Number 8, p.2236-2245, (2005)
Fracture and fatigue behavior at ambient and elevated temperatures of alumina bonded with copper/niobium/copper interlayers, Kruzic, J. J., Marks R. A., Yoshiya M., Glaeser A. M., Cannon R. M., and Ritchie R. O. , Journal of the American Ceramic Society, Oct, Volume 85, Number 10, p.2531-2541, (2002)
Effects of plastic constraint on the cyclic and static fatigue behavior of metal/ceramic layered structures, Kruzic, J. J., McNaney J. M., Cannon R. M., and Ritchie R. O. , Mechanics of Materials, Jan-Feb, Volume 36, Number 1-2, p.57-72, (2004)
Mechanistic aspects of in vitro fatigue-crack growth in dentin, Kruzic, J. J., Nalla R. K., Kinney J. H., and Ritchie R. O. , Biomaterials, Apr, Volume 26, Number 10, p.1195-1204, (2005)
Kitagawa-Takahashi diagrams define the limiting conditions for cyclic fatigue failure in human dentin, Kruzic, J. J., and Ritchie R. O. , Journal of Biomedical Materials Research Part A, Dec, Volume 79A, Number 3, p.747-751, (2006)
Fatigue of mineralized tissues: Cortical bone and dentin, Kruzic, J. J., and Ritchie R. O. , Journal of the Mechanical Behavior of Biomedical Materials, Jan, Volume 1, Number 1, p.3-17, (2008)

Pages