• On Residual Stress Development, Prevention, and compensation in Metal Additive Manufacturing, K Carpenter, A Tabei, Materials 2020, 13(2), 255

  • Size Effect on Microstructural Evolution and Micromechanical Responses of Mechanically Bonded Aluminum and Magnesium by High‐Pressure Torsion, JK Han, JM Park, W Ruan, K Carpenter, A Tabei, J Jang, M Kawasaki, Advance engineering materials 10(2019)

  • Modeling of texture development in additive manufacturing of Ni-based superalloys, A Tabei, E Mirkoohi, H Garmestani, S Liang, The International Journal of Advanced Manufacturing Technology 103(2019), 1057-1066 

  • The effects of dynamic evolution of microstructure on machining forces, Z Pan, A Tabei, DS Shih, H Garmestani, S Liang, Journal of Engineering Manufacture 232(2017), 2677-2681

  • Modeling of Ti-6Al-4V machining force considering material microstructure evolution, Z Pan, DS Shih, A Tabei, H Garmestani, SY Liang, The International Journal of Advanced Manufacturing Technology 91 (2017), 2673-2680 
  • Constitutive modeling of Ti-6Al-4V at a wide range of temperatures and strain rates, A Tabei, FH Abed, GZ Voyiadjis, H Garmestani, European Journal of Mechanics-A/Solids 63 (2017), 128-135
  • The effects of dynamic evolution of microstructure on machining forces, Z Pan, A Tabei, DS Shih, H Garmestani, SY Liang, Proceedings of the institution of mechanical engineers, Part B: Journal of Engineering Manufacture(2017), 0954405417703430
  • Microstructural Evolution in Hot and Cold-Rolled Ti-Nb Alloy, A Tabei, J Startt, RT Hoffman, E Yavari, C Deo, H Garmestani, Journal of Materials Engineering and Performance 26 (2017), 61-68 
  • Micro-texture evolution in aggressive machining of al alloy 7075, A Tabei, DS Shih, H Garmestani, SY Liang, Materials and Manufacturing Processes 31 (2016), 1709-1717
  • Dynamic Recrystallization of Al Alloy 7075 in Turning, A Tabei, DS Shih, H Garmestani, SY Liang Journal of Manufacturing Science and Engineering 138 (2016), 071010
  • Evaluation of the Microstructure and Charpy Impact Toughness of Hot Worked Powder Ti-6Al-4V, OA A. Dominguez, A. Ali, F. Orantes, N. Ula, Y. Li, J. Foyos, A. Tabei, H. Garmestani, Defect & Diffusion Forum Journal 367 (2016), 183-191
  • Effects of Machining on the Microstructure of Aluminum Alloy 7075, A Tabei, SY Liang, H Garmestani, Proceedings of the 2015 International Conference on Applied Mechanics  Mechatronics and Intelligent Systems- AMMIS (2016) 621-627
  • Investigation of precipitate refinement in Mg alloys by an analytical composite failure model, A Tabei, DS Li, CA Lavender, H Garmestani, Mechanics of Materials 89 (2015), 59-71
  • Derivation of Process Path Functions in Machining of Al Alloy 7075, A Tabei, DS Shih, H Garmestani, SY Liang, Journal of Materials Engineering and Performance24 (2015) 4503–4509
  • Analysis of Micro-texture and Grain Size Distributions in Machined Aluminum Alloy 7075, A Tabei, O Fergani, H Garmestani, SY Liang, Advanced Materials Research, 052-1053 (2014) 489-494
  • Prediction of polycrystalline materials texture evolution in machining via Viscoplastic Self-Consistent modeling, O Fergani, A Tabei, H Garmestani, SY Liang, Journal of Manufacturing Processes 16 (2014), 543-550
  • Effects of morphology and geometry of inclusions on two-point correlation statistics in two phase composites, A Tabei, S Ahzi, DS Li, CA Lavender, H Garmestani, Int. J. of Theoretical and Applied Multiscale Mechanics 3 (2014), 1-17
  • Microstructure reconstruction and homogenization of porous Ni-YSZ composites for temperature dependent properties, A Tabei, A Sheidaei, M Baniassadi, F Pourboghrat, H Garmestani, Journal of Power Sources 235 (2013), 74-80
  • Growth of (111) oriented NiFe2O4 polycrystalline thin films on Pt (111) via sol-gel processing, S Seifikar, A Tabei, E Sachet, T Rawdanowicz, N Bassiri-Gharb, J. Schwartz, Journal of Applied Physics 112 (2012), 063908
  • Synthesis and crystallization of lead–zirconium–titanate (PZT) nanotubes at the low temperature using carbon nanotubes (CNTs) as sacrificial templates, MR Mohammadi, A Tabei, A Nemati, D Eder, T Pradeep, Advanced Powder Technology 23 (2012), 647-654