Nuclear Materials and Metallurgy Group Publications
  1. D.J. Sprouster, B. Adam, A. Koziol, L. Rolly, C. Huotilainen, J.D. Tucker, Long-term thermal aging effects in ferritic-martensitic steel HT9, Materials Characterization, Volume 217, 114418, (2024). https://doi.org/10.1016/j.matchar.2024.114418

  1. N. Nigon, J. D. Tucker, T. W. Ekstedt, B. C. Jeong, D. C. Simionescu, and M. D. Koretsky, Adaptivity or agency? Educational technology design for conceptual learning of materials science, Comput. Appl. Eng. Educ. (2024), e22790. https://doi.org/10.1002/cae.22790

  1. I. García-Blanco, S.C. Bozeman, J.D. Tucker, R. González, and O.B. Isgor, Corrosion Behavior of Cobalt–Chromium-Based Laser Claddings Reinforced with Boron Nitride, Graphene Oxide, and Graphite. Adv. Eng. Mater. 2400863 (2024). https://doi.org/10.1002/adem.202400863

  1. I. McGieson, J.D. Poplawsky, M.K Santala and J.D Tucker, Measurement of G-phase volume fraction and number density in duplex stainless steels using transmission electron microscopy. Materials Today Communications, 38, p.107926 (2024). https://doi.org/10.1016/j.mtcomm.2023.107926

  1. F. Teng, T. M. Copeland-Johnson, J.D. Tucker, G. Cao, Accelerated corrosion of Ni-based alloys in molten chloride salts, due to Ni2Cr phase formation, Materialia, 101875, ISSN 2589-1529, (2023). https://doi.org/10.1016/j.mtla.2023.101875.

  1. J.A. Gordon, S.C. Bozeman, E.C. Fischer, O.B. Isgor, J.D. Tucker, Heating duration effects on post-fire structural steel mechanical properties, Fire Safety Journal, Volume 140, (2023), 103848, ISSN 0379-7112, https://doi.org/10.1016/j.firesaf.2023.103848.

  1. S.C. Bozeman, J.D. Tucker, and O.B. Isgor, Corrosion Resistance of 309L Stainless Steel Claddings on Carbon Steel Produced with Wire-Fed Directed Energy Deposition. Corrosion, 79(7), pp.771-781, (2023). https://doi.org/10.5006/4268

  1. N. Aerne, D. Sprouster, J.D. Tucker, The Role of Fe in long-range ordered Ni2Cr precipitates in Ni-Cr-Fe model alloys during isothermal aging, Materials Science and Engineering A, (2023). 10.1016/j.msea.2023.145162

  1. S.C. Bozeman, J.D. Tucker, O.B. Isgor, “Corrosion of proton irradiated 309L stainless steel claddings fabricated by directed energy deposition,” AMPP Annual Conference + Expo, Denver, Colorado, USA, March (2023).

  1. J.H. Ke, and J.D. Tucker, First-principles study of 3sp impurity (S, P, Si, Al) effects on vacancy-mediated diffusion in Ni and Ni-33Cr alloys. Computational Materials Science, 214, (2022). 111768. https://doi.org/10.1016/j.commatsci.2022.111768

  1. N. Aerne, D. Sprouster, J.D. Tucker, The formation and evolution of Ni2Cr precipitates in Ni-Cr model alloys as a function of stoichiometry, Materials Science and Engineering A, (2022): 143930. https://doi.org/10.1016/j.msea.2022.143930

  1. S.C. Bozeman, O.B. Isgor; J.D. Tucker, Metallurgical characterization of 309L stainless steel claddings on carbon steel using wire-directed energy deposition, Surface & Coatings Technology, 444, (2022) 128698. https://doi.org/10.1016/j.surfcoat.2022.128698

  1. C. Evered, N. Aerne, D.J. Sprouster, J.D. Tucker, Acceleration of Long-Range Ordering in NiCrFe Alloys Using Proton Irradiation. The 20th International Conference on Environmental Degradation of Materials in Nuclear Power Systems–Water Reactors. Snowmass, CO. (2022)

  1. G.A.Young, J. Quincey, A.Brittan, P. Shulze, S. Tsotsos, L. Parrington, J.Parrington, A. Demma,  M.J. Hackett, S. Briggs and J. D. Tucker, Assessing Environmentally Assisted Cracking of Structural Alloys in Molten Salts The 20th International Conference on Environmental Degradation of Materials in Nuclear Power Systems–Water Reactors. Snowmass, CO. (2022)

  1. N. Nigon, J.D. Tucker, M. Koretsky, Work in Progress: Adaptive Learning Module for Material Science, American Society for Engineering Education. ASEE Annual Conference Proceedings, July 2022, Minneapolis, MN.

  1. P. Murkute, K.O Sarfo, I. McGieson, M. Santala, Y. Zhang, L. Árnadóttir, J.D. Tucker, and O.B. Isgor, “Effect of thermal aging on corrosion behavior of duplex stainless steels,” SN Applied Sciences 4, no. 4 (2022): 1-18. https://doi.org/10.1007/s42452-022-04978-1

  1. L.Teeter, B. Adam, T. Wood, J.D. Tucker, “Comparison of the Corrosion of Materials in Supercritical Carbon Dioxide, Air, and Argon Environments,” Corrosion Science, (2021), 109752 https://doi.org/10.1016/j.corsci.2021.109752

  1. K.O. Sarfo, O.B. Isgor, M.K. Santala, J.D. Tucker, L. Arnadottir, "Lattice Diffusion of Cl through O vacancies in α-Cr2O3: a density functional theory study," Journal of The Electrochemical Society, (2021), https://doi.org/10.1149/1945-7111/ac0ec9

  1. H.T. Vo, K. Dang, F. Teng, M. Schneide, B.P. Eftink, S.A. Maloy, J.D. Tucker, L. Capolungo, P. Hosemann” Deformation Twinning Versus Slip in Ni-Based Alloys, Containing Pt2Mo-Structured, Ni2Cr-Typed Precipitates”, Materials & Design, 207, (2021), 109820. https://doi.org/10.1016/j.matdes.2021.109820

  1. R. Repukaiti, L. Teeter, M. Ziomek-Moroz, Ö.N. Doğan, R.P. Oleksak, R.B. Thomas, J. Baltrus, D.R. Kauffman and J.D. Tucker, “Corrosion Behavior of Ferritic-Martensitic Steel in H2O Containing CO2 and O2 at 50°C to 245°C and 8 MPa” Corrosion 77.3 (2021): 313-322. https://doi.org/10.5006/3603
     
  2. K.O. Sarfo, P. Murkute, O.B. Isgor, Y. Zhang, J.D. Tucker, L. Arnadottir, "Density functional theory study of the initial stages of Cl-induced degradation of α-Cr2O3 passive film," Journal of The Electrochemical Society, (2020)  https://doi.org/10.1149/1945-7111/abb381

  1. B.M. Adam, J.D. Tucker and G. Tewksbury, Comparative study of the hot processing behavior in advanced Ni-based superalloys for use in A-USC applications. Journal of Alloys and Compounds, 818, (2020) p.152907.https://doi.org/10.1016/j.jallcom.2019.152907

  1. B.M. Adam, J.D. Tucker and G. Tewksbury, 2020. Hot deformation data for Haynes 214, Haynes 230 and Inconel 740H. Data in brief, 28, (2020) p.104923. https://doi.org/10.1016/j.dib.2019.104923

  1. F. Teng, D.J. Sprouster, G.A. Young, J-H, Ke, J.D. Tucker, Effect of stoichiometry on the evolution of thermally annealed long-range ordering in Ni-Cr alloys, Materialia, 8 (2019) 100453 https://doi.org/10.1016/j.mtla.2019.100453

  1. L. Teeter, N. Huerta, M. Ziomek-Moroz, J.D. Tucker, R. Thomas, R. Oleksak, R. Repukaiti, Ö. Doğan, Effect of O2 on the Long-term Operation and Corrosion of Steel X65 in CO2-H2O Environments for Direct Supercritical CO2 Power Cycle Applications, Journal of Supercritical Fluids (2019).

  1. J.D. Tucker, Y. Wei, W. Marcum, and P.V. Murkute, B.J. Gibbons, and O.B. Isgor, Quantifying Oxide Layer Growth at Low Pressures and Temperatures for Aluminum Alloy 6061, Metallurgical and Materials Transactions A, 50(7), (2019), pp. 3388-3398. https://doi.org/10.1007/s11661-019-05256-3

  1. J-H. Ke, G.A. Young, J.D. Tucker, Ab initio study of phosphorus effect on vacancy-mediated process in nickel alloys – An insight into Ni2Cr ordering, Acta Materialia,172 (2019), pp. 30-43. https://doi.org/10.1016/j.actamat.2019.04.036

  1. N. Aerne, F. Teng, J.D. Tucker, Effect of isothermal aging on Ni-Cr-based commercial alloys. The 19th International Conference on Environmental Degradation of Materials in Nuclear Power Systems–Water Reactors. Boston, MA, (2019)

  1.  D.A. Addison, J.D. Tucker, T. Siegmund, V. Tomar, J.J. Kruzic, Cyclic and time-dependent crack growth mechanisms in alloy 617, Materials Science and Engineering: A, 737, (2018) 205-212. https://doi.org/10.1016/j.msea.2018.09.034

  1. L. Sprowl, J.D. Tucker, B. Adam, L. Árnadóttir, First-Principles Study of the Products of CO2 Dissociation on Nickel-Based Alloys: Trends in Energetics with Alloying Element, Surface Science, 667 (2018), pp. 219-231. https://doi.org/10.1016/j.susc.2018.06.011

  1. B. Adam, L. Teeter; J. Mahaffey, M. Anderson, L. Árnadóttir, J.D. Tucker, Effects of corrosion in supercritical CO2 on the microstructural evolution in 800H alloy, Oxidation of Metals, 90 (2018), pp. 453-468.   https://doi.org/10.1007/s11085-018-9852-7.

  1. B. Westman, B. Miller, J-F. Jue, A. Aitkaliyeva, D. Keiser Jr., J. Madden, J.D. Tucker, Analysis and Comparison of Focused Ion Beam Milling and Vibratory Polishing Sample Surface Preparation Methods for Porosity Study of U-Mo Plate Fuel for Research and Test Reactors, Micron, Vol. 110, (2018), pp. 57-66. https://doi.org/10.1016/j.micron.2018.04.010

  1. L. Teeter, B. Adam, T. Wood, S. Teysseyre, J.D. Tucker. In-Situ Environmentally Induced Cracking in sCO2, Proceedings of the 6th International Symposium-Supercritical CO2 Power Cycles. (2018).

  1. R. Repukaiti, L. Teeter, M. Ziomek-Moroz, Ö.N. Doğan, R.B. Thomas, N.J. Huerta, J.D. Tucker Comparison of Grade 91 and 347H, Corrosion Resistance of Low Temperature Components in Direct Supercritical CO₂ Power Cycles, Proceedings of the 6th International Symposium-Supercritical CO2 Power Cycles. (2018). pp. 1-9.

  1. J.D. Tucker, B. Adam, M. Anderson, B. Pint, G.R. Holcomb, C.S. Carney, H. Saari, L. Teeter, J. Mahaffey, Ö. Doğan, C.Jang, S. Kung, Supercritical CO2 Round Robin Test Program, Proceedings of the 6th International Symposium-Supercritical CO2 Power Cycles. (2018).

  1. F. Teng, L.-J. Yu, O. Ciuca, E. Marquis, G. Burke, J.D. Tucker, The Role of Stoichiometry on Ordering Phase Transformations in Ni–Cr Alloys for Nuclear Applications, Proceedings of the 18th International Conference on Environmental Degradation of Materials in Nuclear Power Systems–Water Reactors, Springer, Cham, (2018), pp. 251-259.

  1. D.A. Garfinkel, J.D. Poplawsky, W. Guo, G.A. Young, J.D. Tucker, Influence of Alloying on α-αʹ Phase Separation in Duplex Stainless Steels, Proceedings of the 18th International Conference on Environmental Degradation of Materials in Nuclear Power Systems–Water Reactors, Springer, Cham, (2018), pp. 1183-1192.

  1. N. Kumar, E.A. Patterson, T. Frömling, E. P. Gorzkowski, P. Eschbach, I. Love, M. P. Müller, R. A. De Souza, J.D. Tucker, S.R. Reese, and D.P. Cann, Defect Mechanisms in BaTiO3-BiMO3 Ceramics, Journal of the American Ceramic Society, (2017). https://doi.org/10.1111/jace.15403

  1. R. Repukaiti, L. Teeter, M. Ziomek-Moroz, Ö. Doğan, J. Tucker, Corrosion Behavior of Steels in Supercritical CO2 for Power Cycle Applications, ECS Transactions, 77(11) (2017) 799-808.

  1. R. Repukaiti, P. Murkute, C. Fast, B. Isgor, J. Tucker, Investigation of Corrosion Resistance for Annealed and Hardened Stainless Steels, ECS Transactions, 77(11) (2017) 785-797.

  1. I.J. Love, L. Minc, S. Reese, J.D. Tucker, Prompt Gamma Neutron Activation Analysis of Niobium for Characterization of Light Interstitials, Transactions, American Nuclear Society 2016 ANS Winter Meeting and Nuclear Technology Expo, Caesars Palace, Las Vegas, NV. (2016).

  1. B. E. Westman, J. D. Tucker, B. D. Miller, Microstructural Characterization of Irradiated Fuels and Materials for the United States High Performance Research Reactor Fuel Development Program and the Fuel Cycle Research and Development Program, Transactions, American Nuclear Society 114 (1), (2016) pp. 1145-1147.

  1. L. Teeter, N. Huerta, O. Dogan, M. Ziomek-Moroz, R. Oleksak, D. Oryshchyn, C. Disenhof, J.P. Baltrus, J. Tucker, Corrosion Behavior of Austenitic Stainless Steel in Supercritical CO2 Containing O2 and H2O, ECS Transactions 72(17) (2016) 137-148.

  1. W. Guo, D.A. Garfinkel, J.D. Tucker, D. Haley, G.A. Young, J.D. Poplawsky, An atom probe perspective on phase separation and precipitation in duplex stainless steels, Nanotechnology 27(25) (2016) 254004. https://doi.org/10.1088/0957-4484/27/25/254004

  1. J. Tucker, M. Miller, G. Young, Assessment of thermal embrittlement in duplex stainless steels 2003 and 2205 for nuclear power applications, Acta Materialia 87 (2015) 15-24. https://doi.org/10.1016/j.actamat.2014.12.012

  1. F. Teng, J.D. Tucker, Role of Stoichiometry on Ordering in Ni-Cr Alloys, MRS Online Proceedings Library Archive 1809 (2015) 7-12.

  1. D.A. Garfinkel, J.D. Poplawsky, W. Guo, G.A. Young, J.D. Tucker, Phase separation in lean-grade duplex stainless steel 2101, JOM 67(10) (2015) 2216-2222. https://doi.org/10.1007/s11837-015-1581-7

  1. J.D. Tucker, Solute-Vacancy Interactions in Nickel, MRS Online Proceedings Library Archive 1645 (2014).

  1. L. Barnard, G.A. Young, B. Swoboda, S. Choudhury, D. Morgan, A.V.d. Ven, J.D. Tucker, Atomistic modeling of the order-disorder phase transformation in the Ni2Cr model alloy, Acta Materialia 81 (2014) 258-271. https://doi.org/10.1016/j.actamat.2014.08.017

  1. G.A. Young, J.D. Tucker, D.R. Eno, The Kinetics of Long Range Ordering in Ni-Cr and Ni-Cr-Fe Alloys, Proceedings of the 16th International Conference on Environmental Degradation of Materials in Nuclear Power Systems-Water Reactors, ANS, Asheville, NC (2013).

  1. G. Young, M. Hackett, J. Tucker, T. Capobianco, Welds for Nuclear Systems, in: R.J.M. Konings (Ed.), Comprehensive Nuclear Systems, Elsevier Science (2012), pp. 273-298.

  1. J.D. Tucker, T.K. Nolan, A.J. Martin, G.A. Young, Effect of travel speed and beam focus on porosity in alloy 690 laser welds, JOM 64(12) (2012) 1409-1417. https://doi.org/10.1007/s11837-012-0481-3

  1. L. Barnard, J. Tucker, S. Choudhury, T. Allen, D. Morgan, Modeling radiation induced segregation in Ni–Cr model alloys from first principles, Journal of Nuclear Materials 425(1) (2012) 8-15. https://doi.org/10.1016/j.jnucmat.2011.08.022

  1. G.A. Young, J.D. Tucker, N. Lewis, E. Plesko, P. Sander, Assessment of lean grade duplex stainless steels for nuclear power applications, Proceedings of the 15th International Conference on Environmental Degradation of Materials in Nuclear Power Systems–Water Reactors, TMS, Colorado Springs, CO, 2011, p. 2369.

  1. G.A. Young, R.A. Etien, M.J. Hackett, J.D. Tucker, T.E. Capobianco, Physical metallurgy, weldability, and in-service performance of nickel-chromium filler metals used in nuclear power systems, Proceedings of the 15th International Conference on Environmental Degradation of Materials in Nuclear Power Systems—Water Reactors, Springer, Cham, (2011) pp. 2431-2441.

  1. G.S. Was, J.P. Wharry, B. Frisbie, B.D. Wirth, D. Morgan, J.D. Tucker, T.R. Allen, Assessment of radiation-induced segregation mechanisms in austenitic and ferritic–martensitic alloys, Journal of Nuclear Materials 411(1) (2011) 41-50. https://doi.org/10.1016/j.jnucmat.2011.01.031

  1. J.D. Tucker, G.A. Young Jr, D.R. Eno, Thermal embrittlement of a lean grade of duplex stainless steel: alloy 2003, Solid State Phenomena, Trans Tech Publications, 2011, pp. 331-337. https://doi.org/10.4028/www.scientific.net/SSP.172-174.331

  1. S. Choudhury, L. Barnard, J. Tucker, T. Allen, B. Wirth, M. Asta, D. Morgan, Ab-initio based modeling of diffusion in dilute bcc Fe–Ni and Fe–Cr alloys and implications for radiation induced segregation, Journal of Nuclear Materials 411(1) (2011) 1-14. https://doi.org/10.1016/j.jnucmat.2010.12.231

  1. G.A. Young, J.D. Tucker, M.J. Hackett, Welding Challenges in Generation IV Nuclear Systems, Transactions, American Nuclear Society 102 (2010) 704.

  1. J.D. Tucker, R. Najafabadi, T.R. Allen, D. Morgan, Ab initio-based diffusion theory and tracer diffusion in Ni-Cr and Ni-Fe alloys, Journal of Nuclear Materials 405(3) (2010) 216-234. https://doi.org/10.1016/j.jnucmat.2010.08.003

  1. J. Tucker, T. Allen, R. Najafabadi, T. Allen, D. Morgan, Determination of solute-interstitial interactions in Ni-Cr by first principle, Int. Conf. Adv. Math. Comput. Methods React. Physics, MC, (2009) p. 891.

  1. J. Tucker, T. Allen, D. Morgan, Quantum Mechanical Based Determination of Diffusion in Ni-Cr, Transactions of the American Nuclear Society, 98 (2008) 1026.

  1. J. Tucker, T. Allen, D. Morgan, Ab Initio-Based Defect Properties for Radiation-Induced Segregation Modeling in Fe-Ni-Cr Alloys, Transactions of the American Nuclear Society, 97 (2007) 642-643.

  1. J. Tucker, T. Allen, D. Morgan, Ab Initio Defect Properties for Modeling Radiation-Induced Segregation in Fe-Ni-Cr Alloys, Proceedings of the 13th International Conference on Environmental Degradation of Materials in Nuclear Power Systems–Water Reactors, Whistler, BC, Can., (2007) pp. 1004-14.

  1. T. Allen, L. Tan, J. Tucker, J. Gan, G. Gupta, G. Was, S. Shutthanandan, S. Thevuthasan, Radiation resistance of advanced ferritic-martensitic steel HCM12A, Journal of ASTM international 2(8) (2005) 1-13. DOI: 10.1520/STP37574S