• 2019
        1. Siala, F., Liburdy, J.A., "Power Estimation of Flapping Foil Energy Harvesters Using Vortex Impulse Theory", Under review, J. Renewable Energy
        2. Prier, M. , Liburdy, J.A., "Discrete Vortex Modeling of a Flapping Foil with Activated Leading Edge Motion", AJKFLUIDS2019-4964. ASME 2019 Joint Fluids Engineering Conference
        3. Ziazi, R.M., Liburdy, J.A., "Vortical Structure Characteristics of Transitional Flow through Porous Media", AJKFLUIDS2019-5094. ASME 2019 Joint Fluids Engineering Conference.  

  • 2018

        1. Siala, F., Liburdy, J.A., "Vortex dynamics and impulse-based lift force analysis of oscillating airfoils",Under review, Experiments in Fluids
        2. Totpal, A., Siala, F. and Liburdy, J.A., "Energy harvesting of an oscillating foil at low reduced frequencies with rigid and passively deforming leading edge",Under review, J. Fluids and Structures
        3. Siala, F.F., Liburdy, J.A., 2018, "Force Production Mechanisms of a Heaving and Pitching Foil Operating in the Energy Harvesting Regime". ASME FEDSM2018-83111, Fluids Engineering Conf., Montreal, CA
  • 2017
        1. Totpal, A. Siala, F., and Liburdy, J.A., 2017, "Flow Energy Harvesting of an Oscillating Foil with Rigid and Passive Surface Flexibility". ASME FEDSM2017-69238, Waikoloa, Hawaii
        2. Siala, F., Totpal, A. and Liburdy, J.A., 2017, "Optimal Leading Edge Vortex Formation of a Flapping Foil in Energy Harvesting Regime". ASME FEDSM2017-69343, Waikoloa, Hawaii
  • 2016
        1. Rodgrigues, M. and Liburdy, J.A., 2016, "Transient Heat Transfer Model and Verification for Gas Cylinder Expansion". Int. J. Heat Mass Transfer
        2. Fox, R.G., Juarez, C.D., Pence, D.V. and Liburdy, 2016, "Altering Bubble Dynamics via In-Situ Vapor Extraction". Heat Transfer Engineering
        3. Siala, F., Totpal, A. and Liburdy, J.A., 2016, "Characterization or Vortex Dynamics in the Near Wake of an Oscillating Flexible Foil". J. Fluids Engineering
        4. Fox, R, Pence, D.V. and Liburdy, J.A., 2016, "Control of Bubble Departure Diameter at Hydrophobic, Porous Membranes". ASME HTFEICNMM2016 Conference, Wash DC.
        5. Siala, F., Totpal, A. and Liburdy, J.A., 2016, "The Influence of Surface Flexibility of a Heaving Foil on the Vortex Shedding Dynamics". ASME FEDSM2016, Washington DC.
        6. Siala, F., Totpal, A. and Liburdy, J.A., 2016, "Flow Structure in the Near Wake of a Flexible Heaving Wing Based on PIV Measurements". AIAA Fluid Dynamics Conf. San Diego, CA, Jan. 2016.
        7. Siala, F., Totpal, A. and Liburdy, J.A., 2016, "Investigation of Flow Energy Harvesting of an Oscillating Wing with Passive Surface Flexibility". ASME PowerEnergy 2016, Charlotte, NC. PowerEnergy2016-59360
  • 2015
        1. Wood, B.D., Apte, S.A., Liburdy, S.V., Ziazi, R.M., He, X., Finn, J.R. and Patil, V.A., 2015, "A Comparison of measured and modeled velocity fields for a laminar flow in a randomly packed porous medium". Adv. Water Resources
        2. Siala, F., Liburdy, J.A., 2015, "Energy Harvesting of a Heaving and Forward Pitching Wing with a Passively Actuated Trailing Edge". J. Fluids Structures
        3. Patil, V.A. and Liburdy, J. A., 2015, "Scale Estimation for Turbulent Flows in Porous Media". Chem. Engr. Sci
        4. Siala, F., Totpal, A. and Liburdy, J.A., 2015, "Vortical Flow Structures in the Near-Wake of a Heaving Airfoil with Passively Actuated Leading and Trailing Flaps". 68th APS Division of Fluid Dynamics Meeting, Boston, MA.
        5. Ziazi, R., Liburdy, J.A., Apte, S.V., Wood, B.D. 2015, "Particle image velocimetry measurement of steady, transitional, and turbulent flow in a randomly packed porous media". AGU Annual Fall Meeting, San Francisco
        6. Fox, R., Pence, D. and Liburdy, J.A., 2015, "Characterization of Saturated Boiling from an Artificial Nucleation Site under Transient Heating". ASME IMECE2015-52880, Houston TX
        7. Fox, R., Juarez, C., Pence, D. and Liburdy, J.A., 2015, "The Effect of Vapor Extraction Pressure Differential on Bubble Dynamics and Extraction Area in Isolated Confined Boiling". ASME IMECE2015-52870, Houston TX.
        8. He, X., Apte, SV., Wood, B., and Liburdy, J 2015, "Direct numerical simulation in a porous, face-centered cubic unit cell". AGU Annual Fall Meeting, San Francisco, December 2015
        9. He, X., Apte, SV., Finn, J., Wood, B., and Liburdy, J 2015, "Direct Numerical Simulation of Turbulent Flow in a Porous, Face Centered Cubic Cell". 67th Annual Meeting of APS-DFD, San Fracncisco, November 2014
  • 2014
        1. Patil, V., Finn, J., He, X., Ziazi, R., Apte, S.V., Liburdy, J., and Wood, B., 2014, "Experimental versus computational methods in the study of flow in porous media". FEDSM2014-21886,ASME 2014 4th Joint US-European Fluids Engineering Division Summer Meeting, Chicago
        2. Ziazi, R., He, X., Finn, J., Patil, V., Apte, S.V., Liburdy, J.A. and Wood, B.D., 2014, "Comparison of PIV Measurements and Direct Numerical Simulation of Low Reynolds Number Flow in Porous Media". AGU Fall Meeting, San Francisco, CA
        3. Siala, F. and Liburdy, J.A., 2014, "Characterization Around a Heaving Wing with a Passively Actuated Trailing Edge". 67th Annual Meeting of APS-DFD, San Fracncisco, November 2014
        4. Fox, R., Juarez, C. Liburdy, J.A. and Pence, D.V., 2014, "Altering Bubble Dynamics Via Vapor Extraction". ASME 12th Int. Conf. on Nanochannels, Microchannels, and Minichannels, ICNMM2014-22258, Chicago, IL.
        5. Fox, R., Juarez, C. Liburdy, J.A. and Pence, D.V., 2014, "Bubble Dynamics Via Vapor Extraction". ECI Conference, Marseille, France.
        6. Rushen, J., Siala, F. and Liburdy, J.A., 2014, "Effect of Flexible Trailing Edge on Lift and Drag During Heaving and Pitching". Proc. ASME Fluids Summer Meeting, FEDSM2014-22155.
  • 2013
        1. Patil, V.A. and Liburdy, J.A., 2013, "Turbulent Flow Characteristics in a Randomly Packed Porous Bed Based on Particle Image Velocimetry Measurements". Physics of Fluids
        2. Patil, V.A. and Liburdy, J.A., 2013, "Flow Structures and their Contribution to Turbulent Dispersion in a Randomly Packed Porous Bed Based on Particle Image Velocimetry Measurement". Physics of Fluids
        3. Patil, V.A. and Liburdy, J.A., 2013, "Flow Characterization Using PIV Measurements in a Low Aspect Ratio Randomly Packed Porous Bed". Exp. in Fluids
        4. Salakij, S., Liburdy, J.A., Pence, D.V. and Apreotesi, M., 2013, "Modeling In-Situ Vapor Extraction during Convective Boiling in Fractal-Like Branching Microchannel Networks". Int. J. Heat Mass Transfer
        5. Patil, V., Finn, J., Apte, S. and Liburdy, J.A., 2013, "Comparison of Experimental and Computational Methods in the Study of Flow in Porous Media". 66th Annual Meeting APS DFD, Pittsburgh, PA.
        6. Liburdy, J.A., and Patil, V., 2013, "Scale Estimation for Turbulent Flows in Porous Media". 66th Annual Meeting APS DFD, Pittsburgh, PA.
        7. Patil, V.A. and Liburdy, J.A., 2013, "Predictions of the High Reynolds Number Dispersion Asymptotic Regime Based on Turbulence Measurements in Porous Media". FEDSM2013-16216, Proc. ASME Fluids Engr. Div. Summer Meeting, Incline Village, NV.
        8. Cappello, N., Pence, D.V. and Liburdy, J.A., 2013, "Mass Transport Limitations Through Porous Hydrophobic Membranes". Proc. ASME, Fluids Division Meeting, FEDSM2013-16559, Lake Tahoe, CA.
        9. Narayanan, V., Liburdy, J. and Pence, D., 2013, "Thermal Applications of Microchannel Flows". in Encyclopedia of Aerospace Engineering, eds R. Blockley and W. Shyy, John Wiley
  • 2012
        1. Patil,, V.A. and Liburdy, J.A., 2012, "Optical Measurement Uncertainties due to Refractive Index Mismatching for Flow in a Porous Media". Exp. in Fluids
        2. Patil, V.A. and Liburdy, J.A., 2013, "Flow Structures and their Contribution to Turbulent Dispersion in a Randomly Packed Porous Bed Based on Particle Image Velocimetry Measurement". Physics of Fluids
        3. Apte, S., Liburdy, J., Visbal, M., 2013, "Low Reynolds Number Flow Dynamics of a Thin, Flat Airfoil with Elastically Mounted Trailing Edge". In 42nd AIAA Fluid Dynamics Conference and Exhibit
        4. Salakij, S., Liburdy, J.A. and Pence, D.V., 2012, "Modeling Convective Boiling in Single Diverging Channel with In-Situ Vapor Extraction". HT2012-58268 Proc. ASME 2012 Summer Heat Transfer Conf., Puerto Rico.
        5. Patil, V.A. and Liburdy, J.A., 2012, "Flow Regime Characteristics in Porous Media Flows at High Reynolds Numbers". ASME Fluids Div. Summer Meeting, FEDSM2012-72273, Puerto Rico.
        6. Patil, V.A. and Liburdy, J.A., 2012, "Flow Structure Identification in Unsteady Flow in Porous Media". ASME Fluids Div. Summer Meeting, FEDSM2012-72273, Puerto Rico.
        7. Patil, V., Liburdy, J.A. and Woods, B., 2012, "Flow Structure Characteristics in Transition from Steady to Turbulent Flow in Porous Media". INTERPORE, International Society for Porous Media, Purdue Univ. May, 2012.
        8. Patil, V.A. and Liburdy, J.A., 2012, "Application of method of volume averaging coupled with time resolved PIV to determine transport characteristics of turbulent flows in porous bed". APS-DFD 2012 Meeting
        9. Patil, V.A. and Liburdy, J.A., 2012, "Dispersive and mixing characteristics for turbulent porous media flows based on local length and time scale measurements". APS-DFD 2012 Meeting
        10. Patil, V.A. and Liburdy, J.A., 2012, "Low Reynolds Number Flow Dynamics of a Thin, Flat Airfoil with Elastically Mounted Trailing Edge". AIAA Fluids Dynamics Conference, New Orleans, LA
        11. Sabo, M., Stull, C., Pence, D. and Liburdy,J.A., 2012, "Performance of Two-Phase Confined Impinging Subcooled Water Jets". Int. Conf. on Boiling and Condensation Heat Transfer, ECI, Lausanne, Switzerland
  • 2011
        1. Daniels, B., Liburdy, J.A., and Pence, D.V., 2011, "Experimental Studies of Adiabatic Flow Boiling in Fractal-like Branching Micro-Channels". Exp. Thermal Fluid Science
        2. Drost, K., Johnson, H.M., Apte, S.V. and Liburdy, J.A., 2011, "Low Reynolds Number Flow Dynamics of a Thin Airfoil with an Actuated Leading Edge". AIAA Fluid Dynamics Conf., Honolulu, HI
        3. Wood, B.D., Liburdy, J.A., Apte, S.V., Patil, V.A. and Finn, J. 2011, "Visualization and Analysis of Inertial Flow in Porous Media". Am. Geophysical Union Fall Meeting, S.F., CA.
        4. Tulchinsky, A., Pence, D.V. and Liburdy, J.A., 2011, "Spray Cooling Heat Transfer Enhancement and Degradation Using Fractal-Like Micro-Structured Surfaces".  AJTEC2011-44331, Proc. ASME/JSAM 2011 8th Thermal Engineering Joint Conf. Honolulu, HA
        5. Salakij, S., Liburdy, J.A. and Pence, D.V., 2011, "Modeling Extraction Regime Transitions for Microchannel Vapor Extraction Map in Two-Phase Cooling Applications".  ASME IMECE2010-40976, Proc. ASME IMECE, Vancouver, CA
        6. Patil, V.A. and Liburdy, J.A., 2011, "Evaluation of two-component PIV uncertainty for flow in porous media".  APS Div of Fluid Dynamics Meeting, Baltimore, MD