Journal Articles
  • Shamoto, E., Hashimoto, Y., Shinagawa, M., Sencer, B., 2014, “Analytical estimation of contact stiffness and friction damping in bolted connection”, International Academy for Production Engineering - Annals of the CIRP, Vol. 61/1, pp. 353-356.
  • Sencer, B., Inagaki, S., Shamoto, E., 2014, “A Curvature Optimal Sharp Corner Smoothing Algorithm for High-speed Feed Motion Generation of NC Systems along Linear Tool-paths”, International Journal of Advanced Manufacturing Technology (DOI: 10.1007/s00170-014-6386-2).
  • Sencer, B., Shamoto, E., 2014, “Effective Torque Ripple Compensation in Feed Drive Systems Based on the Adaptive Sliding Mode Controller”, IEEE/ASME Transactions On Mechatronics, Vol. 19, No. 6., pp. 1764-1672
  • Ishizaki, K., Sencer, B., Shamoto, E., 2013, ”Cross Coupling Controller for Accurate Motion Synchronization of Dual Servo Systems”, International Journal of Automation Technologies, Vol.7, No.5, pp. 516-522.
  • Sencer, B., Mori T., Shamoto E., 2013, “Design and Application of a Sliding Mode Controller for Accurate Motion Synchronization of Dual Servo Systems”, Control Engineering Practice, Vol. 21, pp. 1519-1530.
  • Sencer, B., 2013, “Trajectory Generation Methods for CNC Machine Tools”, Journal of the Japanese Society for Precision Engineering (JSPE), Vol.79, Iss.7. pp. 631–637.
  • Shamoto, E., Mori, T., Sencer, B., Suzuki, N., Hino, R., 2013, “Suppression of Regenerative Chatter Vibration in Multiple Milling Utilizing Speed Difference Method - Analysis of Double-Sided Milling and Its Generalization to Multiple Milling Operations”, Precision Engineering, Vol. 37/3, pp. 580–589.
  • Shamoto, E., Fujimaki S., Sencer, B., Suzuki, N., Kato, T., Hino, R., 2012, “A Novel tool path/posture optimization concept to avoid chatter vibration in machining”- Proposed concept and its verification in turning”, International Academy for Production Engineering - Annals of the CIRP, Vol. 61/1, pp. 331–334.
  • Shamoto, E., Aoki, T., Sencer, B., Suzuki, N., Hino, R., Koide, T., 2011, ”Control of Chip Flow with Guide Grooves for Continuous Chip Disposal and Chip-pulling Turning”, International Academy for Production Engineering - Annals of the CIRP, Vol. 60/1, pp.125-128.
  • Sencer, B., Altintas, Y., 2011, “Identification of 5-Axis Machine Tools Feed Drive Systems for Contouring Simulation”, International Journal of Automation Technologies, Vol.5, No.3, pp. 377-385
  • Altintas, Y., Sencer, B., 2010, “High Speed Contouring Control Strategy for Five Axis Machine Tools”, International Academy for Production Engineering - Annals of the CIRP, Vol. 59/1, pp. 417-420.
  • Sencer, B., Altintas, Y., 2009, “Modeling and Control of Contouring Errors for Five-Axis Machine Tools. Part II – Precision Contour Controller Design”, Transactions of ASME Journal of Manufacturing Science and Engineering, Vol. 131, Issue 3, 031007.
  • Sencer, B., Altintas, Y., Croft, E.A., 2009, “Modeling and Control of Contouring Errors for Five-Axis Machine Tools. Part I – Modelling”, Transactions of ASME Journal of Manufacturing Science and Engineering, Vol. 131, Issue 3, 031006.
  • Sencer, B., Altintas, Y., Croft, E.A., 2008, ‘‘Feed Optimization for Five-Axis CNC Machine Tools with Drive Constraints’’, International Journal of Machine Tools and Manufacture, Vol. 48, No 7-8, pp. 733-745

International Conference Articles
  • E. Shamoto, T. Aoki, B. Sencer, T. Koide, 2014, “Effects of Guide Groove Shape on Chip Controllability for Chip-Guiding Turning”, The International Conference on Machining, Materials and Mechanical Technologies, Taipei, TAIWAN.
  • B. Sencer, I. Susumu, E., Shamoto, 2014, “Curvature-continuous Sharp Corner Smoothing Scheme for Cartesian Motion Systems”, 13th IEEE International Workshop on Advanced Motion Control (AMC), Yokohama, JAPAN.
  • E. Shamoto, B. Sencer, S. Fujimaki, 2014, “Regenerative Chatter Avoidance in Turning and Milling by Optimizing Directional Relations between Process and Vibration Mode”, The 3rd International Conference on Virtual Machining Process Technology (VMPT), Calgary, CANADA
  • B. Sencer, T. Aoki, E. Shamoto, T. Hasegawa, T. Koide, 2014, “Development of a Chip Pulling System for Efficient Turning”, 6th CIRP International Conference on High Performance Cutting (HPC) in Berkley, USA.
  • B. Sencer, E. Shamoto, 2013 “Adaptive Torque Ripple Compensation Technique Based on the Variable Structure Control and its Applications to Gear Driven Motion Systems”, American Control Conference (ACC2013), June 17 - 19, Washington, DC, USA
  • Ying-Jie L., Sencer B., Shamoto, E., 2012, “Proposal and Analysis of an Innovative Liquid Bearing Utilizing Traveling Waves”, 5th International Conference on Positioning Technology, November 2012, Kaohsiung City, Taiwan, pp. 221-224
  • Sencer B., Kousuke I., Shamoto E., 2012, “Cross Coupling Controller Design for Motion Synchronization of Dual Motor Driven Servo Systems”, 5th International Conference on Positioning Technology, November 2012, Kaohsiung City, Taiwan, pp. 45-48.
  • Shamoto, E., Mori, T., Sencer, B., Kato, T., Suzuki, N., Hino, R., 2012, “Modeling and analysis of chatter stability in double-sided milling of flexible plates utilizing speed difference method”, The 1st International Conference on Virtual Machining Process Technology, Montreal-Canada.
  • Sencer, B., Mori, T., Shamoto, E., 2012, “A Sliding Mode Controller Design for Position Synchronization of Dual Spindle Servo Systems”, 5th CIRP International Conference on High Performance Cutting (HPC), Procedia CIRP, Vol.1, pp. 250–254
  • Altintas, Y., Sencer, B., 2010, “Identification of 5-Axis Machine Tool Feed Drive Systems for Contouring Simulation”, 4th CIRP International Conference on High Performance Cutting, Gifu-Japan, 24-26 October.
  • Altintas, Y., Sencer, B., C. Okwudire, E. Fung, 2009, “Virtual Five Axis Computer Numerical Control System”, 5th CIRP International Conference and Exhibition on Design and Production of Machines and Dies/Molds, (Keynote Paper), 18- Kusadasi-Turkey, June.
  • Guvenc, B.A., Sencer, B., Giray, M., Guvenc, L., 2004, “Use of a Simulink Engine Blockset in Real Time Hardware in the Loop Simulations”, IEEE International Conference on Mechatronics, Istanbul-Turkey, 3-5 June.
  • Altintas, Y., Sencer, B., 2008, “Feed Optimization for Five-Axis CNC Machine Tools with Drive Constraints”, MTTRF Annual Meeting, San Francisco-USA.

Japanese National Conference Articles
  • B. Sencer, I. Susumu, E., Shamoto, 2014, “Curvature-continuous Sharp Corner Smoothing Scheme for Cartesian Motion Systems”, Japan Society for Precision Engineering (JSPE), Spring Annual Conference, Tokyo, Japan.
  • Kosuke, I., Sencer, B., Suzuki, N., Shamoto, E, 2013, “Modeling and controller design of gantry type stage for suppressing torsional vibration of machine tools with low base stiffness (低剛性ベースの工作機械のねじり振動を抑制するガントリーステージのモデル化とコントローラの設計)”, Japan Society for Precision Engineering (JSPE), Spring Annual Conference, Tokyo, Japan.
  • Sencer, B., Shamoto, E, 2012, “Adaptive Torque Ripple Compensation Technique Based on the Variable-Structure Control”, Japan Society for Precision Engineering (JSPE), Autumn Annual Meeting, Kyusyu, Japan.
  • Sencer, B., Shamoto, E, 2012, “The Effect of Jerk Parameter of the Reference Motion Trajectory on the Oscillatory Behavior of Feed Drive Systems”, Japan Society for Precision Engineering (JSPE), Spring Annual Conference, Tokyo, Japan.
  • Sencer, B., Mori, T., Shamoto, E., 2011, “A Sliding Mode Controller Design for Position Synchronization of Dual Spindle Servo Systems”, Japan Society for Precision Engineering (JSPE), Autumn Annual Conference, Kanazawa, Japan.
  • Sencer, B., Shamoto, E., Mori, T., Yoshikawa, S., 2011, “Development of a Synchronization Controller for Twin Servo Systems”, Japan Society for Precision Engineering (JSPE), Spring Annual Conference, Tokyo, Japan.