OREGON STATE UNIVERSITY
Open search box
September 2021:Congratulations to Dr.Milad to pass his PhD defense with flying colors! Way to go!
August 2021:Our recent paper titled "A Scalable Solution Route to Porous Networks of Nanostructured Black Tungsten"is published in the Journal of Nanomaterials.
July 2021:Our recent paper titled "Fast Predictive Model of Crystallographic Texture Evolution in Metal Additive Manufacturing" is published in the Journal of Additive Manufacturing.
June 2021:Congratulations to Dongqing to pass his MS thesis defense with flying colors! Way to go!
March 2021:Congratulations to Saereh to pass her PE with flying colors! Way to go!
February 2021: Congratulations to Dongqing to received the Graduate School Thesis Completion Award!
January 2021: Our recent paper titled "Statistical Analysis of Porosity and Process Parameter Relationships in Metal Additive Manufacturing" is published in Procedia Manufacturing.
December 2020: Congratulations to Milad to pass his PE with flying colors! Way to go!
December 2020: Our recent paper titled " Thermal Stability of Additively Manufactured Austenitic 304L ODS Alloy," is published in the Journal of Materials Science & Technology! Congratulations to Milad!
November 2020: Our recent paper titled "In-Situ Manufacturing of ODS FeCrAlY Alloy via Laser Powder Bed Fusion," is published in the Journal of Materials Letters! Congratulations to Saereh, Milad, and Ryan!
October 2020: Our recent paper titled "Effect of Build Orientation and Annealing on Corrosion Resistance of Additively Manufactured Duplex Stainless Steel in 3.5% NaCl," is published in the Journal of Electrochemical Society! Congratulations to Greg!
September 2020: Our recent paper titled "The Effect of Annealing on the Selective Laser Melting of 2205 Duplex Stainless Steel: Microstructure, Grain Orientation, and Manufacturing Challenges," is published in the Journal of Optics and Laser Technology! Congratulations and Good job Greg!
August 2020: Our recent paper titled "Effects of Heat Treatment and Applied Stresses on the Corrosion Performance of Additively Manufactured Super Duplex Stainless Steel Clads"is published in the Journal of Materialia. Congratulations to Pratik! Way to go!
July 2020: Our recent paper titled "Selective laser melting and tempering of H13 tool steel for rapid tooling applications" is published in the Journal of Alloys and Compounds. Congratulations to Michael, Milad and Saereh.
June 2020: Our recent paper titled "On the Metal Powder Recyclability within Binder Jet Additive Manufacturing Process" is published in JOM, Congratulations to Saereh!
June 2020: Congratulations to Saereh and Milad for winning the COE Show Case Award! Way to GO!
June 2020: Our recent paper titled “Metallurgical and Electrochemical Properties of Super Duplex Stainless Steel Clads on Low Carbon Steel Substrate produced with Laser Powder Bed Fusion,” is published in Nature Scientific Reports. Great job Pratik!
May 2020: Our recent paper titled "Selective Laser Melting of Austenitic Oxide Dispersion Strengthened Steel: Processing, Microstructural Evolution and Strengthening Mechanism" is accepted in the Journal of Materials Science and Engineering A. Great work Milad!
April 2020: The MAGMA Lab gets shut down due to COVID-19.
March 2020: Greg Nigon has successfully defended his MS thesis on Selective Laser Melting of Duplex Stainless Steels 2205 for Sea Water Applications.
March 2020: Dr. Pasebani was awarded by TMS Materials Processing and Manufacturing (MPMD) Division.
March 2020: Dr. Pasebani was a judge at Materials Bowl Competition and Student Poster Competition at TMS 2020.
February 2020: Hannah's paper on "Use of Bimodal Particle Size Distribution in Selective Laser Melting of 316L Stainless Steel" is published in the journal of Manufacturing and Materials Processing, MDPI.
January 2020: Milad's manuscript is published in Journal of Additive Manufacturing with Impact factor of 7! Congratulations Milad!
December 2019: Greg Nigon been nominated by Dr. Pasebani and selected by the Graduate School to receive a Travel Award . Congratulations Greg!
November 2019: Dr. Pasebani is chosen as recipients of the TMS 2020 MATERIALS PROCESSING & MANUFACTURING DIVISION (MPMD) YOUNG LEADERS PROFESSIONAL DEVELOPMENT AWARD approved by the TMS MPMD Nominations & Awards Committee!
October 2019: Dr. Pasebani's story is published in Alumni magazine.
October 2019: Dr. Pasebani and group presented at MS&T2019, Portland, OR.
September 2019:
Saereh's paper " A Review on Binder Jet Additive Manufacturing of 316L Stainless Steel" has been published in JMMP as part of the Special Issue Recent Development in Metal Additive Manufacturing and is available online: https://lnkd.in/gP_ZdM9.
August 2019:
Dr. Pasebani gave an oral presentation in the Solid Free Form Fabrication 2019 in Austin, Tx.
July 1, 2019:
Dr. Pasebani is a visiting scholar at the Politecnico di Milano - Department of Mechanical Engineering for a month.
June 17, 2019:
Dr. Pasebani received a grant of $486,220 from NSF on “Nanoparticle Dispersion Mechanisms in Additively Manufactured Metal-matrix Composites and Functionally-graded Materials”. Dr. Joshua Gess is a co-PI on this grant.
June 11, 2019: Pushing the boundaries of metal 3D printing! OSU metal 3D printing team!
May 30, 2019: Dr. Pasebani had dinner with Oregon State University Board of Trustees and President Ed Ray in ATAMI and gave an overview of her research.
May 18, 2019: A paper on "Production of corrosion-resistant 316L stainless steel clads on carbon steel using powder bed fusion-selective laser melting", coauthored by Dr. Pasebani is published in Journal of Materials Processing Technology 273 (2018) 116243.
https://www.sciencedirect.com/science/article/pii/S0924013619302079
May 15, 2018:Our SSG HB 400 Wire EDM has arrived! Our MAGMA Lab can now EDM the 3D printed parts.
March 18, 2019: Hannah Coe defended her MS thesis in Mechanical Engineering with Advanced Manufacturing Option. In April, she will start her job at Boeing, Seattle!
March 12, 2019: Michael Katancik successfully defended his Honors College Undergraduate Thesis. Congratulations! In april, he will start his job in Mainstream Eningeering corporation in Florida!
March 1, 2019: Recent Manuscript is published in Journal of Materials Characterization.
https://www.sciencedirect.com/science/article/pii/S1044580318332376
February 8, 2019: Amir, Pratik , Saereh and Milad presented their research at OSU COE Graduate Student Show Case 2019!
February 2019: A paper on "Diversity in the Minerals, Metals, and Materials Professions (DMMM3), co-authored by Dr. Pasebani is published in JOM.
January 2019: Hannah G. Coe received the OSU Graduate School's Thesis Completion Award. Good Luck Hannah!
December 2018: Our research is featured in the school of MIME website: https://mime.oregonstate.edu/ and Forfront Fall/Winter 2018-19:
https://mime.oregonstate.edu/sites/mime.oregonstate.edu/files/documents/...
September 20, 2018: Congratulations to Michael Katancik for being awarded an Honors College Experience Scholarship in the amount of $1,000. Way to go Michael!
September 12, 2018: Dr. Pasebani's proposed symposium on Additive Manufacturing Education is accepted for inclusion at Materials Science & Technology (MS&T) 2019. The meeting will be held 9/29/2019 - 10/3/2019, Portland OR.
August 27, 2018: Master's student, Hannah G. Coe, receives a Travel Award by the Oregon State University Graduate School to attend MS&T2018- Materials Science and Technology technical meeting and exhibition, in Columbus, Ohio. Congratulations!
August 2018: Dr. Pasebani is on the organizing team of "Additive Manufacturing for Energy Applications" symposium at TMS2019, San Antonio, TX.
August 2018: Dr. Pasebani and research team led by Professor Brian Paul received a grant on Leveraging Federal Investments in Modular Chemical Process Intensification to Expand the Metal 3D Printing Technology Industry within Oregon from Oregon Business Development Department ($1,000,000).
July 2018: LibLab Video on metal 3D printing was published on youtube and on Corvallis Gazette-Times: Can you 3D print a solid metal? and OSU grad student debuts new science video on 3-D metal printer
June 2018: Katrina Singh and James Valencia are SESY students spend a week in our lab working on metallography of additively manufactured 316L samples.
June 2018: Sarah Mirzababaei and Amir Dehghan join our group as PhD students in ME/Advanced Manufacturing. Welcome to MAGMA Lab!
May 2018: Our recent publication is accepted in the Journal of Additive Manufacturing.
April 2018: Milad gives an oral talk in SME RAPID 2018 in Forthworth, TX.
March 2018: Dr. Pasebani co-organized the TMS Diversity breakfast: fresh idea, fresh coffee, TMS 2018, Phoenix, AZ.
March 2018: Dr. Pasebani’s proposed a symposium on “Additive Manufacturing Education” to the TMS technical committee.
February 2018: Hannah and Milad presented their research in COE Graduate Students Show Case 2018.
February 2018: Students in Additive Manufacturing Class, MFGE 599 visited HP Multi-Jet Fusion Laboratory. Thanks to HP 3D printing team.
January 2018: Dr. Pasebani received a grant on Rapid tooling via additive manufacturing, from Oregon Manufacturing Innovation Center (OMIC) ($54,000)
December 2017: Dr. Pasebani received MIME Instructional and Research Equipment Grants on Acquisition of FORMLABS FORM2 Stereolithography 3D Printer ($8,000)
November 2017: OR Creator Selective Laser Melting machine arrived in ATAMI
October 2017: Dr. Pasebani co-organized the TMS Diversity Symposium, MS&T 2017, Pittsburgh, PA.
September 2017: Hannah attended Thermocalc workshop and travelled to Germany to get trained on OR Creator SLM machine. Super Productive Summer!
August 2017: Total Solar Eclipse 2017 - Corvallis, OR
July 2017: Dr. Pasebani attended MIT workshop on Additive Manufacturing in Boston, MA.
June 2017: Dr. Peyman Samimi joined us a post-doctoral research scholar funded by Post-Doctoral research associate, Northwest Collaboratory for Sustainable Manufacturing. Welcome to PMAM.
June 2017: Dr. Pasebani and team led by professor Brian Paul received a grant on “Acquisition of Equipment for Nano/Micromanufacturing and 3D Printing” from Murdock Charitable Trust ($1,147,185)
May 2017: Hannah G. Coe was awarded “College of Engineering Outstanding Graduate Teaching Assistant”. Way to go Hannah!
Hannah is receiving her GTA award from OSU Dean of COE, Scott Ashford.
April 2017: Dr. Pasebani and team led by professor Brian Paul received a grant on Manufacturing Supply Chain Development for the STARS Technology Modular Solar-Thermochemical Conversion Platform, from US DOE ($926,639).
March 2017: Milad Ghayoor Joined us a PhD student in Materials Science. Welcome to MAGMA Lab.
February 2017: Dr. Pasebani and Dr. MacCarty jointly received MIME Strategic Excellence Initiative Investigation of Materials for Haitian Charcoal Combustion Chamber ($5,000) | Co-PI
February 2017: Dr. Pasebani received MIME Strategic Excellence Initiative, Acquisition of Metal 3D Printer with Selective Laser Sintering/Melting Capabilities ($11,000) | PI
January 2017: Hannah G. Coe joined us as a MS student in Mechanical Engineering/Advanced Manufacturing. Welcome to MAGMA Lab.
January 2017: Dr. Pasebani received a grant for a Post-Doctoral research associate, Northwest Collaboratory for Sustainable Manufacturing ($45,000)
December 2016: Dr. Pasebani received an industry sponsored research funding from OMI and ATI Specialty Alloys Inc. ($43,000)
November 2016: Our MAGMA laboratory is born!
October 2016: Dr. Pasebani attended and gave an oral talk at MS&T2016 in Salt Lake City, UT.
September 2016: Dr. Pasebani joins MIME as an assistant professor in Advanced Manufacturing.
