Peer Reviewed Publications: "To understand, to discover, to communicate- this is the destiny of a scientist" Francois Arago.

Google Scholar

  1. Y. Lei, M. Ghayoor, S. Pasebani, A. Tabei, Fast Predictive Model of Texture Evolution in Metal Additive Manufacturing, Journal of Crystals, 11 (5) (2021) 482-489.

  2. S. Ball, M. Ghayoor, S. Pasebani, A. Tabei, “Statistical Analysis of Porosity and Process Parameter Relationships in Metal Additive Manufacturing,” Procedia Manufacturing,  2021.

  3. M. Ghayoor, S. Mirzababaei, A. Sittiho, I. Charit, B.K. Paul, S. Pasebani, “Thermal Stability of Additively Manufactured Austenitic ODS Alloy,” Journal of Materials Science and Technology, (2020), Impact factor: 6.1, key contributer.
  4. S. Mirzababaei, M. Ghayoor, R.P. Doyle, S. Pasebani, “In-Situ Manufacturing of ODS FeCrAlY Alloy via Laser Powder Bed Fusion,” Journal of Materials Letters 284 (2020), 129046, Impact factor: 3.0, key contributer.  
  5. M. Ghayoor, S. Mirzababaei, A. Sittiho, I. Charit, B.K. Paul, S. Pasebani, “Thermal Stability of Additively Manufactured Austenitic ODS Alloy,” Journal of Materials Science and Technology, (2020), Impact factor: 6.1, key contributer.
  6. G.N. Nigon, B. Isgor, S. Pasebani, “Corrosion Performance of Additively Manufactured Duplex Stainless Steel 2205,” Journal of Electrochemical Society, 167 (2020) 141508, Impact factor: 3.7, key contributer.
  7. G. Nigon, O. Burkan Isgor, S. Pasebani, "The Effect of Annealing on the Selective Laser Melting of 2205 Duplex Stainless Steel: Microstructure, Grain Orientation, and Manufacturing Challenges," Journal of Optics and Laser Technology, 134 (2021) 106643.
  8. P. Murkute, S. Pasebani, O.B. Isgor, Effects of Heat Treatment and Applied Stresses on the Corrosion Performance of Additively Manufactured Super Duplex Stainless Steel Clads,” Journal of Materialia 14 (2020) 100878 1-15, Impact factor : 7.2, student’s co-advisor and committee member.
  9. M. Katancik, M. Ghayoor, S. Mirzababei, S. Pasebani, “Selective Laser Melting and Tempering of H13 Steel for Rapid Tooling,” Journal of Alloys and Compounds 849 (2020) 156319 1-12, Impact factor : 4.6, key contributer.
  10. S. Mirzababaei, B.K. Paul, S. Pasebani, “Metal Powder Recyclability in Binder Jet Additive Manufacturing,” JOM 72 (2020) 3070-30379, Impact factor: 2.3, key contributer.
  11. P. Murkute, S. Pasebani, O.B. Isgor, “Metallurgical and Electrochemical Properties of Super Duplex Stainless Steel Clads on Low Carbon Steel Substrate produced with Laser Powder Bed Fusion,” Nature Scientific Reports 10(1) (2020) 10162, Impact factor: 11.88, student’s co-advisor, reviewed and revised and committee member.
  12. B.K. Paul, K. Lee, Y. He, M. Ghayoor, C. Chang, S. Pasebani, “Oxide dispersion strengthened 304L stainless steel produced by ink jetting and laser powder bed fusion,” to Journal of CIRP Annals Manufacturing Technology, 00 (2020) 1-4, Impact factor: 3.8 , provided data and data analysis.
  13. M. Ghayoor, K. Lee, Y. He, C. Chang, B.K. Paul, S. Pasebani, “Selective Laser Melting of 304L Austenitic Oxide Dispersion Strengthened Steel: Processing, Microstructural Evolution and Strengthening Mechanisms,” Journal of Materials Science and Engineering: A, 788 (2020), 139532 1-12, Impact factor: 4.08, key contributer.
  14.  H. Coe, S. Pasebani, “Use of Bimodal Particle Size Distribution in Selective Laser Melting of 316L Stainless Steel,” Journal of Manufacturing and Materials Processing (2020), 4, 8; https://doi.org/10.3390/jmmp4010008 (registering DOI)
  15. M. Ghayoor, K. Lee, Y. He, C. Chang, B.K. Paul, S. Pasebani, “On the Role of Laser Volumetric Energy Density on the Microstructure and Texture of 304L Stainless Steel Components Additively Manufactured via Selective Laser Melting,” Journal of Additive Manufacturing, 32 (2019) 101011 1-13.
  16. S. Mirzababaei, and S. Pasebani, “A Review on Binder Jet Additive Manufacturing of 316L Stainless Steel,” Journal of Manufacturing and Materials Processing, 3 82 (2019).
  17. M. Ghayoor, K. Lee, Y. He, C. Chang, B.K. Paul, S. Pasebani, “Microstructural Analysis of Additively Manufactured 304L Stainless Steel Oxide Dispersion Strengthened Alloy,” Microscopy and Microanalysis, 25 (2019) 2594-2595.
  18. S. Pasebani, P. Samimi, M. Saber, “Effects of scandium and hafnium solute additions on microstructure thermal stability in nanostructured ferritic alloys", Journal of Materials Characterization, 151 (2019) 216-220.
  19. P. Murkute, S. Pasebani, O.B. Isgor, “Production of Corrosion-Resistant 316L Stainless Steel Clads on Carbon Steel Using Powder Bed Fusion Selective Laser Melting,” Journal of Manufacturing Processing Technology, 273 (2018) 116243.
  20. M. Korey, A. Murphy, S. Pasebani, P. Sepehrband, and N. Vermaak, Diversity Breakfast Raises Awareness for Inclusive Engineering Workplaces, JOM -- The Journal of The Minerals, Metals & Materials Society (TMS), 70 (2018) 2790-2796.
  21. S. Pasebani, M. Ghayoor, S. Badwe, H. Irrinki, S. Atre, “Water Atomized 17-4 PH Stainless Steel Powder as a Cheaper Alternative Powder Feedstock for Selective Laser Melting, Journal of Materials Science Forum, 941 (2018) 698-703 .
  22. S. Pasebani, H. Coe, M. Ghayoor, I. Charit, “A Review of the Manufacturing of Oxide Dispersion Strengthened Steels: Past and Current Methods, and Future Directions,” Journal of Advanced Engineering Materials, Submitted (2018).
  23. S. Pasebani, S.M. Ghayoor, S. Badwe, H. Irrinki, S.V. Atre, “Effect of Atomizing Media and Post Processing on Mechanical Properties of 17-4 PH Stainless Steel Manufactured via Selective Laser Melting,” Journal of Additive Manufacturing, 22 (2018) 127-137.
  24. H. Irrinki, J. Samuel, D. Jangam, S. Pasebani, S. Badwe, J. Stitzel, K. Kate, S. Atre, “Effects of Particle Characteristics on the Microstructure and Mechanical Properties of 17-4 PH Stainless Steel Fabricated by Laser-Powder Bed Fusion", Journal of Powder Technology, 331 (2018) 192-203. 
  25. S. Pasebani, A. Guria, I. Charit, Y. Wu, J. Burns, “A Preliminary Investigation of High Dose Ion Irradiation Response of a Lanthana-Bearing Nanostructured Ferritic Steel Processed via Spark Plasma Sintering,” Journal of Nuclear Materials, 495 (2017) 78-84.
  26. S. Alsagabi, S. Pasebani, I. Charit, “Mechanical properties and microstructural stability of grade 92 steel at different stages of tempering,” submitted (2017).
  27. A .K. Dutt, S. Pasebani, I. Charit, R.S. Mishra, “Microstructural Evolutions of High Temperature Dual-scale Particle Strengthened Nickel-based Alloy Using Genetic Algorithm Optimization,” Materials and Design, (2017) Submitted.
  28. S. Pasebani, M.R. Toroghinejad, G. Dini, “Nanotwins Formation in Accumulative Roll-Bonded Brass,” IJMF, Iranian Journal of Materials Forming, 4 (2017) 21-27.
  29. A.K. Dutt, S. Pasebani, I. Charit, R.S. Mishra, “On the creep behavior of dual-scale particle strengthened nickel-based alloy,” Materials Science and Engineering: 676 (2017) 406-410.
  30. H. Irrinki, M. Dexter, B. Barmore, R. Enneti, S. Pasebani, S. Badwe, J. Stitzel, R. Malhotra, S. V. Atre, “Effects of powder attributes and laser powder bed fusion (L-PBF) process conditions on the densification and mechanical properties of 17-4 PH stainless steel,” JOM, 68 (2016) 860-868.
  31. S. Alsagabi, S. Pasebani, I. Charit, “High temperature tensile properties and related microstructural evolution in grade 92 steel,” Journal of Mechanical and Creep Behavior of Advanced Materials Springer Link TMS  (2017) 229-242.
  32. S. Pasebani, I. Charit, Y.Q. Wu, J. Burns, K.N. Allahar, D.P. Butt, J.I. Cole, S.F. Alsagabi, “Lanthana-bearing nanostructured ferritic steels via spark plasma sintering,” Journal of Nuclear Materials, 470 (2016) 297-306.
  33. S. Pasebani, I. Charit, D.P. Butt, J.I. Cole, Y.Q. Wu, J. Burns, “Sintering behavior of lanthana-bearing nanostructured ferritic steel consolidated via spark plasma sintering,” Advanced Engineering Materials, 18 (2016) 324-332.
  34. S.F. Alsagabi, I. Charit, S. Pasebani, “The irradiation performance and microstructural evolution in 9Cr-2W steel under ion irradiation,” Journal of Materials Engineering and Performance, 25 (2016) 401-408.
  35. S. Pasebani, I. Charit, R.S. Mishra, “Effect of tool rotation rate on constituent particles in a friction stir processed 2024Al Alloy,” Materials Letters, 160 (2015) 64-67.
  36. S. Pasebani, I. Charit, J. Burns, D.P. Butt, J.I. Cole, S. Alsagabi, L.M. Price, L. Shao, “Microstructural stability of a self-ion irradiated lanthana-bearing nanostructured ferritic steel,” Journal of Nuclear Materials, 462 (2015) 191-204.
  37. S. Pasebani, A. Dutt, J. Burns, I. Charit, R.S. Mishra, “Oxide dispersion strengthened nickel-based alloys via spark plasma sintering,” Materials Science and Engineering: A, 630 (2015) 155-169.
  38. S. Pasebani, A. Dutt, I. Charit, R.S. Mishra, “Nickel-chromium alloys: Engineered microstructure via spark plasma sintering,” Materials Science Forum, 783-786 (2014) 1099-1104.
  39. S. Pasebani, I. Charit, “Effect of alloying constituents on spark plasma sintering of nanostructured ferritic steels,” Journal of Alloys and Compounds, 599 (2014) 206-211.
  40. S. Pasebani, I. Charit, D.P. Butt, Y.Q. Wu, J.I. Cole, “Mechanical alloying of lanthana-bearing nanostructured ferritic steels,” Acta Materialia, 61 (2013) 5605-5617.
  41. S. Pasebani, I. Charit, D.P. Butt, J. Cole, “A preliminary study on the development of La2O3-bearing nanostructured ferritic steels via high energy ball milling,” Journal of Nuclear Materials, 434, (2013) 282-286.
  42. S. Pasebani, M.R. Toroghinejad, “Nano-grained 70/30 brass strip produced by accumulative roll-bonding (ARB) process,” Materials Science and Engineering: A, 527, 15 (2010) 491-497.
  43. S. Pasebani, M.R. Toroghinejad, M. Hosseini, J. Szpunar, “Textural evolution of nano-grained 70/30 brass produced by accumulative roll-bonding,” Materials Science and Engineering: A, 527, 7-8 (2010) 2050-2056.